L92 Valves
Thread Starter
TECH Fanatic
iTrader: (17)
Joined: Feb 2004
Posts: 1,501
Likes: 0
From: Little Elm, TX
L92 Valves So who has them? I just got off the phone with REV and they're not releasing theirs till the end of february. Anyone know whats up? This is the only thing i'm missing to put my heads on.
TIA!
TIA!
Last edited by DoesSpeedTurnUon; Jan 9, 2007 at 05:06 PM.
Who did you talk to here at SDPC? I have them on the shelf ready to ship! Call me if I can get you a set!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
Thread Starter
TECH Fanatic
iTrader: (17)
Joined: Feb 2004
Posts: 1,501
Likes: 0
From: Little Elm, TX
Originally Posted by Matt @ SDPC
Who did you talk to here at SDPC? I have them on the shelf ready to ship! Call me if I can get you a set!
Originally Posted by DoesSpeedTurnUon
lol thanks again matt! SDPC has the valves
stock valves... not lighter aftermarkets.... I am on the phone with Matt now.
he said that if and when rev or manley or whoever come out with some he will carry them.
I really dont want stock heavy valves in my heads. Someone has an aftermarket 2.18 valve available... I would only do this with a bore larger than 4.060...... not on my 4.030, I would be fearful of valve shrouding.
Last edited by WizeAss; Jan 9, 2007 at 06:23 PM.
Originally Posted by Forteen3GT
stock valves... not lighter aftermarkets.... I am on the phone with Matt now.
he said that if and when rev or manley or whoever come out with some he will carry them.
I really dont want stock heavy valves in my heads. Someone has an aftermarket 2.18 valve available... I would only do this with a bore larger than 4.060...... not on my 4.030, I would be fearful of valve shrouding.
he said that if and when rev or manley or whoever come out with some he will carry them.
I really dont want stock heavy valves in my heads. Someone has an aftermarket 2.18 valve available... I would only do this with a bore larger than 4.060...... not on my 4.030, I would be fearful of valve shrouding.
Trending Topics
Thread Starter
TECH Fanatic
iTrader: (17)
Joined: Feb 2004
Posts: 1,501
Likes: 0
From: Little Elm, TX
Originally Posted by SUTTERERMAN85
i need some L92 valves also...i will be calling you also matt
Originally Posted by Forteen3GT
stock valves... not lighter aftermarkets.... I am on the phone with Matt now.
he said that if and when rev or manley or whoever come out with some he will carry them.
I really dont want stock heavy valves in my heads. Someone has an aftermarket 2.18 valve available... I would only do this with a bore larger than 4.060...... not on my 4.030, I would be fearful of valve shrouding.
he said that if and when rev or manley or whoever come out with some he will carry them.
I really dont want stock heavy valves in my heads. Someone has an aftermarket 2.18 valve available... I would only do this with a bore larger than 4.060...... not on my 4.030, I would be fearful of valve shrouding.
Im soo stumped on why no one is going that route?
REV will custom make some valves for the L92 heads in the meantime. They'll cost more but you could have them in a week or so. They can make the valves a little longer to facilitate springs for big lift cams if needed.
Richard
Richard
Originally Posted by Richard@WCCH
REV will custom make some valves for the L92 heads in the meantime. They'll cost more but you could have them in a week or so. They can make the valves a little longer to facilitate springs for big lift cams if needed.
Richard
Richard
Originally Posted by Richard@WCCH
REV will custom make some valves for the L92 heads in the meantime. They'll cost more but you could have them in a week or so. They can make the valves a little longer to facilitate springs for big lift cams if needed.
Richard
Richard
Originally Posted by Louis
8mm stems are not nearly as popular as the 5/16 stems. Just requires some guide work.
Originally Posted by V6 Bird
Exactly my point. A good machinist/builder knows what to do to get the job done. We have people trying to go around a very reputable builder...HK Enterprises knows these things. Quit asking for answers on a board that doesnt have near the knowledge that Erik has.
i know better then to bug Koenig with this stuff!
Originally Posted by Forteen3GT
i know better then to bug Koenig with this stuff!
Originally Posted by Dragaholic
I'd like to get a set of titanium valves myself, at least for the intake valves. What are some popular companies that make them? What kind of price am I looking at?
