L92 pushrods
Thread Starter
TECH Enthusiast
Joined: Sep 2003
Posts: 730
Likes: 66
L92 pushrods If used on a stock 6 liter and no milling and stock gaskets were used would these heads then use a 7.4" pushrod? A guy is doing a buildup on a stock cammed C6 to see the difference but he is using .030 gaskets to get back to near stock compression. No change is base circle would suggest a 7.375" pushrod if it were the same as a 243 head.
Anyone know for sure what the stock length pushrods are in a L92?
Anyone know for sure what the stock length pushrods are in a L92?
11 Second Club
Joined: May 2007
Posts: 226
Likes: 1
From: Sydney
Warning Virgin Poster Newbie Alert.
Hi guys I have one of these in Australia what size are the stock pushrods plse? Am doing a cam swap shortly have ordered 7.400 rods but now think I made need shorter.
Cheers
PS: Love your site.
Hi guys I have one of these in Australia what size are the stock pushrods plse? Am doing a cam swap shortly have ordered 7.400 rods but now think I made need shorter.
Cheers
PS: Love your site.
