2007 2500 6.0 Vortec=l92??
06-30-2007, 05:07 PM
#1
2007 2500 6.0 Vortec=l92?? I have a 2007 model 6.0 vortec motor that i just got.
as along block. the heads a have a 832 cast in the head in the space below
the valve covers.
the rear of the block has the 6.0 cast in and this #12578181
block is cast iron
has the cam sensor on the front timimg cover like the ls2
square tube ss fuel rails and what looks to be the l76 truck intake
with a dbw tb.
i think this motor is equipped with l92 heads, but i do not want to take heads off to verify, also i wont be able to remove intake till monday. to check intake ports.
any one know specifics?
as along block. the heads a have a 832 cast in the head in the space below
the valve covers.
the rear of the block has the 6.0 cast in and this #12578181
block is cast iron
has the cam sensor on the front timimg cover like the ls2
square tube ss fuel rails and what looks to be the l76 truck intake
with a dbw tb.
i think this motor is equipped with l92 heads, but i do not want to take heads off to verify, also i wont be able to remove intake till monday. to check intake ports.
any one know specifics?
07-02-2007, 02:34 PM
#3
Staging Lane
iTrader: (5)
Join Date: Jan 2006
Location: Arkansas
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
They are the same heads and intake that are on the L92 engine. The L92 engine responds very well to tuning and the L76 should also. Are you planning to modify it? Is it iron or alum?
