Generation IV Internal Engine 2005-2014 LS2 | LS3 | LS7 | L92 | LS9

SDPC 416 in and ready to go

Thread Tools
 
Search this Thread
 
Old Jul 21, 2007 | 11:03 AM
  #21  
Deeavi's Avatar
Thread Starter
TECH Enthusiast
iTrader: (16)
 
Joined: Nov 2003
Posts: 670
Likes: 2
From: Bowman, SC
Default

SDPC sent us a break in guide and all we did was vary RPMS and kept it under 4k. We ran two 45min break in periods then changed the oil. We are waiting until we can get our HP Tuners working(not sure what is going on w/ it cable must be bad ) to drive it because we think it is running lean.
Reply
Old Jul 24, 2007 | 06:46 AM
  #22  
Deeavi's Avatar
Thread Starter
TECH Enthusiast
iTrader: (16)
 
Joined: Nov 2003
Posts: 670
Likes: 2
From: Bowman, SC
Default Got HP Tuners Working!

Originally Posted by Deeavi
SDPC sent us a break in guide and all we did was vary RPMS and kept it under 4k. We ran two 45min break in periods then changed the oil. We are waiting until we can get our HP Tuners working(not sure what is going on w/ it cable must be bad ) to drive it because we think it is running lean.
Plugged in some changes in my tune and the car is running pretty dogone good now. It is STRONG! The only real problem we are having is a drop in rpm when I push the clutch in at a stop. It quickly recovers, but it is a little rough at that point. Going to work on it some more. We have an appointment to get it tuned on the 17th of August. Going to try an get a few thousand miles on it before then.

Overall we are pretty happy so far
Reply
Old Jul 24, 2007 | 07:49 AM
  #23  
JoeyGC5's Avatar
TECH Addict
iTrader: (24)
 
Joined: Jun 2003
Posts: 2,645
Likes: 0
From: St Joe, MO
Default

Thanks for the update
Reply




All times are GMT -5. The time now is 08:00 PM.