Production stopped on LSX blocks?
thank you,
did I mention I hate the phone company? I just got the same person who didnt get it fixed for me the last time.. and vented my frustration with having a fucked up phone since thanksgiving.. LMAO!
did I mention I hate the phone company? I just got the same person who didnt get it fixed for me the last time.. and vented my frustration with having a fucked up phone since thanksgiving.. LMAO!
Ask Brian about the PRC LS7 heads! We are a distributor for them and that might be a good way to get some extra pony from your setup without breaking the bank!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
Finally! Just got off the phone with Brian. Hey is that thing painted? LOL I'm thinking a red block in my black bay with my UMI front end (black) and ls7 heads and billet covers.
After speaking with Brian and am supremely confident in the block I am receiving. Cant wait! LSX 451 with LS7 heads. Its gonna rock!
After speaking with Brian and am supremely confident in the block I am receiving. Cant wait! LSX 451 with LS7 heads. Its gonna rock!
Last edited by 99blancoSS; Dec 26, 2007 at 05:50 PM.
Well I wont name my source but I was told there is truth to the defects but none of them ever made it out to the GP. They are going to be done in house and so the delay now is the legal delays for the molds and lawyers and bullshit that goes with it. I have complete confidence in my block. Any defects would have showed in machining it.
you guys got it all wrong , china ran out of lead from putting it in the kids toys and is waiting for a fresh shipment of lead to come in , so they can get it mixed up with the drugs and cast into a block 
lol
someone had to say it
lol
someone had to say it
I know that some of the AL rims GM uses made by Alcoa are made in the USA. My father built the heat treatment equipment for the facility.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
[/IMG]
6600 rpm clutch dump of death Administrator
Joined: Dec 2001
Posts: 4,983
Likes: 13
From: Texas
I've heard of some blocks having issues with some of the rear cylinders being thin, and breaking through on big overbores. I think it is recommeded that you sonic check any current blocks to verify wall thickness. I discussed this with several folks at PRI. I don't know that this is the reason for the block being on backorder, it may simply be a separate issue. its just something I've discussed with some folks who have dealt with them.
I've heard of some blocks having issues with some of the rear cylinders being thin, and breaking through on big overbores. I think it is recommeded that you sonic check any current blocks to verify wall thickness. I discussed this with several folks at PRI. I don't know that this is the reason for the block being on backorder, it may simply be a separate issue. its just something I've discussed with some folks who have dealt with them.
