Is this everytthing????
With:
Eagle crank
Eagle rods
Diamond pistons with a -4cc Dish
Fast 36 lbs
Tsp Fuel pump upgrade
PTM 90mm Tb
90mm Fast
Texas giant 248/254 .618 .622 on a 112 lsa
Patriot Perf. Stage 2 Ls6 heads with 2.055 intake 1.57 exhaust
Custom tuning
Asp 25% under-drive pulley
160 stat
Lid
Pacesetters LT
TSP ORY
Just some info on the car, it's a M6 car, I have the Ram Powergrip HD, 3.42 gears, and Drag radials out back. So my question is, do I need anything else to complete my swap?
Oh yeah....everyones favorite, kind of power level should I be at/what et should the car run...( I know but I had to!)
With:
Eagle crank
Eagle rods
Diamond pistons with a -4cc Dish
Fast 36 lbs
Tsp Fuel pump upgrade
PTM 90mm Tb
90mm Fast
Texas giant 248/254 .618 .622 on a 112 lsa
Patriot Perf. Stage 2 Ls6 heads with 2.055 intake 1.57 exhaust
Custom tuning
Asp 25% under-drive pulley
160 stat
Lid
Pacesetters LT
TSP ORY
Just some info on the car, it's a M6 car, I have the Ram Powergrip HD, 3.42 gears, and Drag radials out back. So my question is, do I need anything else to complete my swap?
Oh yeah....everyones favorite, kind of power level should I be at/what et should the car run...( I know but I had to!)
The reason I ask is it kinda looks like a list out of a "shopping cart"
What kind of exhaust setup are you running???? if you can sell Pacesetter and go with bigger headers and TSP true duals.
I think you can get 520rwhp with stock rear.
WHta is the engien compresstion???
Trending Topics
so it'll be the pacesetters and the ory with a cut-out for a while... the CP will be 11.3 to 1 I hope i don't blow the rear out of it!!!! I'm hoping for around that number but i'm just not sure that the heads, and exhaust are going to keep up. I just put the deposit down on the motor on friday, but if I go with a 370 do you guys think that the car would get to 480-490 rwhp, and about 440 lbs The Best V8 Stories One Small Block at Time
made 531rwhp with 9inch I think 530rwhp is possible if you have great tuner.
Did you blow your 346ci???
Good luck man and keep us posted.
at least for a while!!!!! I really hope the ram keeps up brother, I know a few guys with Spec 3's that didn't last on mild 346's so that would mean I would have to go to a tex.... and I really don't have that kind of money!!! 


