ls2 heads and cam from Speed INC
Thread Starter
TECH Apprentice
iTrader: (9)
Joined: Mar 2006
Posts: 392
Likes: 0
From: Columbus , Ohio
ls2 heads and cam from Speed INC what does everything think about this head / cam combo from speed , Patriot Stage2 heads . on an 364cid LS2 6.0 engine .. what heads should i get as far as 59cc or 64cc ? the 59cc or the probally the 64cc heads ? what cam would you consider from Speed to go with here for street Application ?
here is a listing from SPeed INC .
http://www.ls1speed.com/cont.cfm?cid=C0000322
here is a listing from SPeed INC .
http://www.ls1speed.com/cont.cfm?cid=C0000322
Last edited by BadLtBlu99TA; Feb 5, 2008 at 04:38 PM.
Go with the SI2 cam and 64cc heads. Before even considering the 59cc I would want to know the piston to deck clearance. My LS2 was .005 out of the hole. This will help you: http://www.c5frc.com/calculators/Com...Calculator.htm
Thread Starter
TECH Apprentice
iTrader: (9)
Joined: Mar 2006
Posts: 392
Likes: 0
From: Columbus , Ohio
Piston out of the deck its hard to tell how far the piston is over the deck , cause since the engine isnt warmed up , you can slightly move the head of the piston toward the top and bottom of the engine .. im guessing its about .005 to about .010 out
You check it on the intake side and exhaust side of the piston and divide by 2 for your average. The difference between .005 and .010 is huge. You want to make sure to be accurate.
