C6Antwon

Im installing an AEM wideband in my 05 C6 and I wanted to know what wire are you guys using to tap into power for the gauge?

Any help would be appreciated!

Thanks,
Anthony

DAVESS02

iTrader: (30)

For my wideband and my raptor shift light, I tapped into two 12ga wires directly under and to the left of the steering column. One wire was brown and the other was yellow. I just used a test light to see what wires went hot with the ignition. The ground is supposed to be directly to the battery per PLX's rec., the mfg. of my wideband kit. I ran mine to the small gound cable that bolts onto the right inner wheelhouse structure on my 2002 F-body.