LSX FAQ or posts?
LSX FAQ or posts? I bought a new LSX Block today and now need to learn about what I have now... Trying to figure out what interchanges, what doesn't. Can anyone recommend any FAQ's, sites or posts I can start to read up on this? In general when looking at parts for this, do I think LS2?
Objective is torque, not max HP. I've got a new TSP LS1 Torquer V2 and a FAST 90/90 intake setup already. I've been told I need to ditch my TSP LS1 PRC 2.5 Heads. If I use L92 heads, should I also ditch the cam? Any other head/cam recommendations? Rockers?
Since it needs to be bored, and don't have pistons yet, what should I do there?
Thanks,
Charlie
Objective is torque, not max HP. I've got a new TSP LS1 Torquer V2 and a FAST 90/90 intake setup already. I've been told I need to ditch my TSP LS1 PRC 2.5 Heads. If I use L92 heads, should I also ditch the cam? Any other head/cam recommendations? Rockers?
Since it needs to be bored, and don't have pistons yet, what should I do there?
Thanks,
Charlie
Last edited by CharlieC; Aug 9, 2008 at 05:59 PM.
