stroker 6.2
Thread Starter
Teching In
Joined: Apr 2008
Posts: 12
Likes: 0
From: Alberta Canada EH!
stroker 6.2 just read the car craft article on big cube gen 3/4's. my question is if I was to put a ls7 crank and rods, and use the 6.2 pistions to make a 414 would that work? I had a quick look but could not find the info. any help please
LS7 crankshaft basically wont' work, unless your making plans for corvette accessory and oil pan.
LS7 rods can work with a stroker crankshaft, but are very expensive, and will need custom pistons.
6.2 pistons? well they are 1.340" compression height, they are for stock stroke.
probably best to go with a 6.2 block, callies compstar crankshaft/rods and take your choice of any the big name piston companies (diamond, wiseco, mahle), they all make 4.070" pistons
LS7 rods can work with a stroker crankshaft, but are very expensive, and will need custom pistons.
6.2 pistons? well they are 1.340" compression height, they are for stock stroke.
probably best to go with a 6.2 block, callies compstar crankshaft/rods and take your choice of any the big name piston companies (diamond, wiseco, mahle), they all make 4.070" pistons
