Gen 5 LT1 swap
#21
Gen v lt1 swap
I have swapped the gen v 6.2 from the corvette in my 70 chevelle looks great turns over all day but still no start...no power to the injectors and my hp tuners or scanner will not connect to ecm?..
#22
Gen v lt1 c7 engine swap in chevelle
I have swapped the c7 lt1 in my 1970 chevelle. She runs like a champ. I hope to repainted it soon n be riding. Check out my YouTube...gen v swap chevelle.
#23
#26
There are several companies making swap mounts for older small blocks, and I did see a company that also specializes in older Chevy tricks. I dont wanna drop any names if they arent sponsers, but I did find them through Googling then recently.
#27
Not sure if this is the correct place to post but I'm selling a set of the dirty dingo slider gen V swap mounts for $75 shipped. Comes with bolts. Was just used for mock up.
#28
2016 Camaro SS
Is the engine in the 2016 Camaro an LS motor or LT1, and how can I determine which one i have.
#29
TECH Senior Member
The 2016 Camaro uses the LT1
#30
Teching In
Join Date: Feb 2008
Location: Southern New Jersey
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
I'm getting ready to start a Gen V LT1 swap into an 88 IROC. Slowly doing all the research and just started buying parts. One thing seems to be a problem. Headers. I can't find a vendor who makes them for this swap. I found flanges and was wonder if I should just get LS headers and change the flanges. Would this work?
#31
Check out Holley for the swap pan and TB spacer. The pan is like the 2nd, Holley pan. (Fbody)
#33
That and if it would actually fit in this cramped engine bay with headers.
With my Firehawk hood I have plenty of clearance for the supercharger.
Probably would have to use a 4" exhaust.
Last edited by Rob94hawk; 10-27-2017 at 05:36 AM.
#36
#37
Check out this thread on the fuel pump requirements.
https://ls1tech.com/forums/generatio...questions.html
https://ls1tech.com/forums/generatio...questions.html