Cheapest for pacesetter lts?
I got mine from texas speed. I have also heard that Summit may be cheaper in certain parts of the country...I know that they are not even close in mine though.
I have heard many great things about texas speed, but personally I have not had great service from them. 2 out of three orders I made with them were supposedly in stock, but were either they were not in stock and I was not notified and the other time they waited about a week before they even sent my order...they said it was a weather delay, but I'm not buying it for the week delay.
I'll still give them one more shot though
I have heard many great things about texas speed, but personally I have not had great service from them. 2 out of three orders I made with them were supposedly in stock, but were either they were not in stock and I was not notified and the other time they waited about a week before they even sent my order...they said it was a weather delay, but I'm not buying it for the week delay.
I'll still give them one more shot though
I'm pretty sure Texas-speed has the best deals right now. They have a $10 off any purchase over $100. Plus they are running a special on the headers themselves. Contact them for pricing.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
You know what....I posted in Texas Speeds thread about the pacesetters asking for a price. Never got it. Then I sent a private message to the person who posted that in the sponsor section...TWICE...and still no response. I then emailed another person from texas speed through this site (from another group special posted) and still NO RESPONSE. There are plenty of vendors out there and will not use one who I can't give my money to. I will try byunspeed. Thanks!
Dwayne I just replied to your PM 
Sorry I'm slow with the PM's, I am backed up about 60 PM's right now!!
We have the coated headers for 374.99, the y is 124.99 & the extensions are $40 on special. If you put NEWSITE on the website in the discount folder you will also get another $10 discount on top of that
We should have the next big run of pacesetter headers here tomorrow or Thurs so anyone looking for headers can get them shipped this week!
Jason
Texas Speed
www.texas-speed.com
Sorry I'm slow with the PM's, I am backed up about 60 PM's right now!!We have the coated headers for 374.99, the y is 124.99 & the extensions are $40 on special. If you put NEWSITE on the website in the discount folder you will also get another $10 discount on top of that
We should have the next big run of pacesetter headers here tomorrow or Thurs so anyone looking for headers can get them shipped this week!
Jason
Texas Speed
www.texas-speed.com
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Dwayne I have only 1 PM from you, I bet the other PM went to one of the guys on holiday vacation. 
I PM'd ya though
I PM'd ya though
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
We just received a large shipment of Pacesetter headers today guys! All backorders will be shipping & anyone needing a set feel free to call or order online! We will do our best to ship before the Christmas break!
We might not always be the cheapest, but I can promise you this>
-We don't operate a hole in the wall shop out of our garage or apt. complex, we run over 8k sq ft of space.
-We work hard to dyno test & tweak combinations for the good of the ls1 community
-Our prices will be very very comparable
-If you order parts from us chances are they will ship from us instead of eventually drop shipping from the manufacturer.
-We price match the competition
All I'm saying is price doesn't determine everything, if every shop was run out of their house there wouldn't be huge camshafts, crazy valve angle heads, big bore resleeved blocks, people testing 6.2l/7.0l heads, etc... We'd probably all still be running lids & Borla catbacks like in 1998
Sometimes the cheapest place is the cheapest because that's all they have to offer. At Texas Speed we work to build & sell the best products possible. Chances are if you buy it from us we've ran it on atleast one of our cars.
Every employee here has a LS1 car!
Jon has 01 SS
Brian 01 Z
Joseph 99 Z & 67 camaro w/ ls1
Jason 05 C6, 05 GTO, 01 WS6 (mom has ls1 also )
Trevor 05 C6 99 Z28 Race Car
The shop also has a 98 Z Race Car for testing!
We might not always be the cheapest, but I can promise you this>
-We don't operate a hole in the wall shop out of our garage or apt. complex, we run over 8k sq ft of space.
-We work hard to dyno test & tweak combinations for the good of the ls1 community
-Our prices will be very very comparable
-If you order parts from us chances are they will ship from us instead of eventually drop shipping from the manufacturer.
-We price match the competition
All I'm saying is price doesn't determine everything, if every shop was run out of their house there wouldn't be huge camshafts, crazy valve angle heads, big bore resleeved blocks, people testing 6.2l/7.0l heads, etc... We'd probably all still be running lids & Borla catbacks like in 1998
Sometimes the cheapest place is the cheapest because that's all they have to offer. At Texas Speed we work to build & sell the best products possible. Chances are if you buy it from us we've ran it on atleast one of our cars.
Every employee here has a LS1 car!
Jon has 01 SS
Brian 01 Z
Joseph 99 Z & 67 camaro w/ ls1
Jason 05 C6, 05 GTO, 01 WS6 (mom has ls1 also
)Trevor 05 C6 99 Z28 Race Car
The shop also has a 98 Z Race Car for testing!
Last edited by Jon@Texas-Speed; Dec 22, 2005 at 09:39 AM.
Thanks Rob! Let us know if you need anything else!
Happy Holidays!
Jon
Happy Holidays!
Jon
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com