Moser 9" rears... any interest?
Thread Starter
Joined: Apr 2003
Posts: 853
Likes: 0
From: Tallahassee, Florida
Moser 9" rear's...any intrerest??? i believe there are at least 2 here in tallahassee interested. who else? and can it be done for under 2 grand if theres enough people?
Banned
Joined: Jan 2006
Posts: 14
Likes: 0
i've had both a moser 9" and strange 9" in fbodies, there is NO difference in quality. the moser housing is cheaper, but the strange center section is nicer. do a mix and match, and if you get a 9" for under 2k you'll be my hero.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by Exotic Performance Plus
Yes, you cannot get just ABS, at least not with a Moser 9 inch. I can get you a Moser 9 inch with a Truetrac and without the 4 channel for $2,300.00 shipped. $2,400 shipped for ABS/TCS. Bob
thanks
Originally Posted by Y2K SS
Sorry but I don't quite get it. Basically what I'm asking is if I can get a 9" that I can bolt up to my 2000 and have everything work properly.
thanks
thanks
Originally Posted by CAT3
Knucklehead...you have 3 channel ABS, meaning there are a total of 3, count them...1 in each front spindle (that's 2) and one in the top center of the rear housing, 2+1=3. And as I mentioned to you before, you cannot get 3 channel in the 9" rearends. Ditch the fricken ABS bullshit, or go 12bolt. Remember when we talked about your reluctor wheel being mounted to the Ring gear? Gees.
Originally Posted by CAT3
Knucklehead...you have 3 channel ABS, meaning there are a total of 3, count them...1 in each front spindle (that's 2) and one in the top center of the rear housing, 2+1=3. And as I mentioned to you before, you cannot get 3 channel in the 9" rearends. Ditch the fricken ABS bullshit, or go 12bolt. Remember when we talked about your reluctor wheel being mounted to the Ring gear? Gees.
Originally Posted by TTU98SS
whats your problem asswipe hes just asking a ****** question
If I could get a 9" (for my car
) for $2400 shipped, I'd be a happy camper 
Many of my customers who have only ABS, which is the three channel, simply do away with it and order a Moser 9 inch. You will have that ABS light staring at you on the dash, until you do something to the (sledgehammer, etc) light. Bob
Originally Posted by Drew778
It's cool, they're butt budies
If I could get a 9" (for my car ) for $2400 shipped, I'd be a happy camper
If I could get a 9" (for my car
) for $2400 shipped, I'd be a happy camper By the way Charlie already told me he put a 9 inch in your rear for free
Originally Posted by TTU98SS
whats your problem asswipe hes just asking a ****** question
As for you Larry... instead of listening to conversations, go fix one of your 4 Camaro's so at least one works.
On the serious side.... I'll try this again. What is Truetrac??