corey id go with an ls6 cam

Nasty, what is your cam, I can't find it's specs.

i got one that should work well, 250/266, thts a turbo cam right?

put the stock one in, itll make better power, and ur springs are already done, the stocker will help em last a little longer

227/239dur 551/551lift 108lsa. I've got 17* of overlap but i might be fine for a low boost build. Its not ideal, but, i like being different and doing things nobody says can be done.
Joe don't forget, i've got those other springs im putting in. Comp 918s.

Just run it and see. You will have to work the turbo a little bit harder to make boost, but that's what it's there for, plus if I remember right your car sounds pretty good with that cam in there.

Thanks wizard and bob, I haven't done anything new to the car since it's tune over 3 months ago. The battery bolt went bad so I had to keep trying to keep it connected. When I bought a new bolt and replaced it it still just died without trying to idle. The car starts strong. Battery is not low.

items I'm selling and some 'giveaways'

Hughes LS1/4L60E convertor 2500rpm stall,lockup,# 22-25EL,Summit # HUP-22-25EL,New-Unused,went in a different direction-got a Yank SS3600. $300

Air Lift 1000 Load Assist Rear Spring Kit 'Drag Bags' AIR-60897,New-box opened to look at kit,but not used. Went to QA1 dual adjustable rear shocks so the air bags became unnecessary. $50

Plug wires Moroso MOR-73535,New,not used. Bought to have a spare set in case I ever needed to replace the OEM's. I was given a low mileage OEM set, so the purchased set became 'available to sell. $60

2-16x8 93-96 'salad shooter' rims w/center caps $50

GM Chrome ZR1 rim w/Goodyear 275/40/ZR17 tire-unused-$200

got some OEM 'giveaways' if somebody's in need
-torque arm off an SS M6
-2 panhard bars
-4 LCAs'

Denny, I need stock suspension parts. Tq arm, phb, lcas

the lcas' and panhard are as removed.
the torque arm,no long thru the rearend bolts and no clamshell mount.