Used parts FS at LsFest! Swap/meet
#42
injectors
I have for sale:
*$150 12-bolt Strange spool with Richmond 4.56 gears and all bearings < 200 miles
*$250 60 lb/hr Siemens injectors - on a car for 3 days before it was wrecked and dismantled
*$200 46 lb/hr injectors from a Procharger kit - were removed to upgrade to the 60's
*$150 15x7 Camaro Rally's with 26"x9" Hoosier slicks; screwed to rims
*$50 Fuel log for Holley 4150
I'll only bring parts that if someone wants them though...
*$150 12-bolt Strange spool with Richmond 4.56 gears and all bearings < 200 miles
*$250 60 lb/hr Siemens injectors - on a car for 3 days before it was wrecked and dismantled
*$200 46 lb/hr injectors from a Procharger kit - were removed to upgrade to the 60's
*$150 15x7 Camaro Rally's with 26"x9" Hoosier slicks; screwed to rims
*$50 Fuel log for Holley 4150
I'll only bring parts that if someone wants them though...
#43
Fuel system
I will be at the LS Fest
I'm in need of
fuel rails with crossover
in line fuel pump/regulator (good for turbo)
turbo and or supporting parts
injectors (60lb or larger)
I'm gathering parts for my ls swap/turbo build in my 1986 C10 if you have something i need pm me with info and price etc. Thanks
I'm in need of
fuel rails with crossover
in line fuel pump/regulator (good for turbo)
turbo and or supporting parts
injectors (60lb or larger)
I'm gathering parts for my ls swap/turbo build in my 1986 C10 if you have something i need pm me with info and price etc. Thanks
#44
10 Second Club
iTrader: (5)
Join Date: Aug 2012
Location: NW Indiana
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
yes very good shape, they were in my car until I decided to buy Kirkeys.I'm short on time right now so on the car I'll put the basic rundown until later55k mile 2000 hardtop SS (light) Hugger Orange w/ while berger stripes13:1 451 w/ ported LS7 heads and MAST single plane w/ 4500 TBpowerglide w/brake12 bolttubular everythingfull suspension
Okay bud bring the seats with you, ill take them, PM me your number and ill call you on Saturday when im at the track and ill give ya some cash! Sounds like a good start to your car, love the hugger orange, bet its expensive?
My son and I have a 224/228 588 112lsa cam,dum
The kit I have is 90mm plate but should fit a 92mm TB, any interest?
Okay bud bring the seats with you, ill take them, PM me your number and ill call you on Saturday when im at the track and ill give ya some cash! Sounds like a good start to your car, love the hugger orange, bet its expensive?
My son and I have a 224/228 588 112lsa cam,dum
The kit I have is 90mm plate but should fit a 92mm TB, any interest?
#51
TECH Enthusiast
iTrader: (23)
I have a brand new Strange 3" 4130 driveshaft with 1350 Joints and a Strange 4130 yoke for a 4L80 or a 400T if anyone is interested. Will do 400.00 for both the shaft is brand new th yoke is lightly used has the good solid Strange 1350 joints in it.
Also have a new Samco stand alone T-56 control box, lets you use the factory lock out in a stand alone set up or carbbed set up 80.00
Also have a new Samco stand alone T-56 control box, lets you use the factory lock out in a stand alone set up or carbbed set up 80.00
#52
9 Second Club
iTrader: (96)
I'm in desperate need of adjustable lower control arms on both ends with spherical ends, New or Used with all hardware. If there is a sponsor on here that will be coming to BG please let me know. They need to fit 2oo1 Transam. Please respond to this post.
Thanks Tommy
Pro Stock John, do you know of any vendors such as Texas Speed, UMI or anyone else that might be at the LS Fest that I could get to bring these control arms?
Thanks again.
Thanks Tommy
Pro Stock John, do you know of any vendors such as Texas Speed, UMI or anyone else that might be at the LS Fest that I could get to bring these control arms?
Thanks again.
He's a sponsor on here.
#53
I have a 220/228 cam .598 both sides LSA 113 with duel springs for sale $225. Jp performance single chain timing gear set(NEW) $50. Melling performance oil pump (New) LS1 $65. If some one wants i will bring up.
#55
TECH Enthusiast
iTrader: (23)
I forgot I also have a Like new set of M/T 28 x 10.5 x 15 Slicks have 8 runs on them have a ton of check hole left 200.00 Like new set of M/T 26.0/4.5-15 ET front runners still have the **** on them 200.00 package deal 350.00 I swapped over to radials at all 4 corners. All tires were marked for location and rotation when removed.
Last edited by 68 SS; 09-04-2013 at 01:31 PM.
#56
10 Second Club
iTrader: (5)
Join Date: Aug 2012
Location: NW Indiana
Posts: 718
Likes: 0
Received 0 Likes
on
0 Posts
I forgot I also have a Like new set of M/T 28 x 10.5 x 15 Slicks have 8 runs on them have a ton of check hole left 200.00 Like new set of M/T 26.0/4.5-15 ET front runners still have the **** on them 200.00 package deal 350.00 I swapped over to radials at all 4 corners. All tires were marked for location and rotation when removed.
#58
Show me cash and I'll work with you if serious..
Honey comb tail lights.. near mint condition 200$
set (8) ls1 fbody coil packs 60$
2000 Ls1 computer.. Tuned for my 370 setup... 50$
auto shifter that has been shortened and the adapter to run a ball on it (push down to change gears)... 75$
set of headers... they are fairly rough condition but still work fine.. No holes or anything.. I'll throw in what is left of the y pipe also.. 60$
Hooker muffler... 100$
Solid motor mounts (PA).. 1200 miles on them... 60$
UMI short style black adjustable torque arm with relocation (m6 or a4 cars)... 250$
Not bringing the large things (headers/ypipe etc) unless I know ahead of time someone wants them.
Honey comb tail lights.. near mint condition 200$
set (8) ls1 fbody coil packs 60$
2000 Ls1 computer.. Tuned for my 370 setup... 50$
auto shifter that has been shortened and the adapter to run a ball on it (push down to change gears)... 75$
set of headers... they are fairly rough condition but still work fine.. No holes or anything.. I'll throw in what is left of the y pipe also.. 60$
Hooker muffler... 100$
Solid motor mounts (PA).. 1200 miles on them... 60$
UMI short style black adjustable torque arm with relocation (m6 or a4 cars)... 250$
Not bringing the large things (headers/ypipe etc) unless I know ahead of time someone wants them.
Last edited by lemons12; 09-04-2013 at 09:09 PM.
#60
Moser Fab M9... 3.70 gear tru track... powder coated black... Moser adj torque arm... aluminum pinion support.. strange center Has brackets for suspension..
I will have pictures..
2000$...
I will not be bringing this with me... If you want it I need to know soon so I can have arrangements for someone to bring it up on Saturday or Sunday. Low miles behind a mid 11 car (20 passes or so).
Obviously dirty, cleans up very nice.. https://ls1tech.com/forums/attachmen...e-arm-fab9.jpg
I will have pictures..
2000$...
I will not be bringing this with me... If you want it I need to know soon so I can have arrangements for someone to bring it up on Saturday or Sunday. Low miles behind a mid 11 car (20 passes or so).
Obviously dirty, cleans up very nice.. https://ls1tech.com/forums/attachmen...e-arm-fab9.jpg
Last edited by lemons12; 09-04-2013 at 09:14 PM.