im new, and i dont know too much
02-13-2010, 08:30 PM
#1
Registered User
Thread Starter
Join Date: Feb 2010
Location: maine
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
im new, and i dont know too much hey guys i have a turbo 240sx at the moment and im joining an ls forum because i really want to do an ls1 swap into a 240. i really feel confident that i could do it if i get the funds. im joining the forum so i can do some more research on the ls motors
02-14-2010, 02:15 PM
#5
welcome to the 8 cylinder darkside 
theres more info here than you could ever need. make sure you check out the classifieds for motots, they pop up all the time, especially the truck motors (those get real cheap). what are you building the motor for? stock, boost, high n/a?
theres more info here than you could ever need. make sure you check out the classifieds for motots, they pop up all the time, especially the truck motors (those get real cheap). what are you building the motor for? stock, boost, high n/a?
02-17-2010, 10:06 PM
#6
Registered User
Thread Starter
Join Date: Feb 2010
Location: maine
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
i really just want to put an ls motor in a 240 and keep it stock probly. im so over the boost sceene. from what ive seen it will be more than enough power to drift on wich is why i want to build it. and i want that reliability and the lightwieght aluminum block. any suggestions on motors? i was thinking ls1
jeez i just want a zr1 so bad though. ha.
jeez i just want a zr1 so bad though. ha.
02-17-2010, 10:47 PM
#7
You came to the right place. There are guys on this site that know everything, no joke.
And every one of them, at one point in time, knew less about LS1 engines then you know right now.
There's lots of good material here you can study. Get at it, and good luck.
And every one of them, at one point in time, knew less about LS1 engines then you know right now.
There's lots of good material here you can study. Get at it, and good luck.