here we go again...Newbie
#1
Teching In
Thread Starter
Join Date: Oct 2011
Location: Alexandria IN
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
here we go again...Newbie
And she thought I was over this already.Just bringing some old tricks to the table to see if I can get a rise out of a few here! I am currently in the process of breathing new life into a old Friend.Current config is MS tube chassis 109in. 1968 Camaro Four link w Strange struts,454 progressive N2O, 400thm Brk, 2950lb loaded.We have decided to piece together a LS2 with a F1R with a new chassis with a goal of 2350lb and 1.0 60ft times.Current config runs 8.0 @ 1.70sh with 1.18 60ft. I am anxious to see how these LS engines respond to a light load! Going to be interesting.
#5
Teching In
Thread Starter
Join Date: Oct 2011
Location: Alexandria IN
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Correct thinking on Mechanical Roller and race cars. I think where we are going on this project is a "Technical" budget. And a hydraulic might act as a Mental rev limiter if you will. We have a bad habit of working on the high side of tach! Speaking of Camshafts,Who has access to the cores and grinds the most popular LS cams?