New to LS1 Tech
Thread Starter
Teching In
Joined: Oct 2013
Posts: 9
Likes: 0
New to LS1 Tech Hello guys. I am new to posting on LS1 tech. I have been lurking around for a while but finally got around to posting this up. I have a 68 Camaro that I have restored. I replaced both quarters, floor pan, trunk pan, rear tail light panel and driver door. I have a Heidts subframe with complete suspension. I have a 4 link in the rear. Just put on a Wilwood big brake kit. I initially stayed with the 383 stroker that was in the car along with the T5 trans. I have some custom interior work done as well as the trunk. Running Boss 338 wheels. 245/35/18 in the front and 275/30/20 in the rear.
I decided it was time to get with the times and sold the stroker motor and T5. I am close to making the purchase of a 525hp LS3 crate with the hot cam set up and T56 magnum trans.
I ran RTTH 8 and DSEs Southern Slam which landed me the small picture on the front cover of Camaro Performers Magazine.
I look forward to picking all of the brains on this site.
ADDED SOME PICS AND HERE IS A VIDEO
Brian
I decided it was time to get with the times and sold the stroker motor and T5. I am close to making the purchase of a 525hp LS3 crate with the hot cam set up and T56 magnum trans.
I ran RTTH 8 and DSEs Southern Slam which landed me the small picture on the front cover of Camaro Performers Magazine.
I look forward to picking all of the brains on this site.
ADDED SOME PICS AND HERE IS A VIDEO
Brian
Last edited by skinsandjrfan; Nov 25, 2013 at 01:08 PM. Reason: Add Pictures
