Hi Im new..My project is a 91 S10 reg cab shortbed strange truck had a 4.3 5 speed no air no power steering 4.10 open rear..Im throwing in it a 2007 4.8 350 turbo with an auburn limited slip..I have done V8 S10s but this gen III stuff is so different..I plan on keeping it fuel injected and that's where Im in trouble most ls swapped vehicles I have seen are carbed..I have many questions and many pics of hoses sensors and wiring that are stumping me because of my extreme ignorance to this new beast..This site is awesome

 

Hers are some pics of these I need help with I.D..two are of the fuel evaporator I do know this but I don't know what to do with it seeming that my S10 does not have the canister..The fuel inlet is one pic Im told there are returnless and then the type that sends the fuel back..Red alternator wire have know idea where it goes.Others hoses that I have know idea what they are or what they do..Also did not get a maf sensor with this engine?or O2 sensors

 

Welcome to Tech!
There's a lot of good info here, so be patient and be ready to do a lot of reading!
I also suggest you start here, in the Conversions & Hybrids section.
https://ls1tech.com/forums/conversions-hybrids-28/