ly6/6l90 swap into 67C10
07-23-2015, 07:34 AM
#1
Registered User
Thread Starter
Join Date: Jul 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ly6/6l90 swap into 67C10 Hello all. New to the forum. Been wrenching on GM and Harley stuff over half my life. Now getting around to the real fun. Has anyone else tackled a ly6/6l90 swap? I have the whole donor vehicle 07 2500hd. Id like to use the donor gauges because of the gear indicator for manual mode. Will I have to keep the bcm? And what are people using for a shifter in this application? (Was thinking 09g8 shifter or cts shifter for the manumatic tutd) I see speartech makes a harness and uses the caddy shifter (I think). But I like to do things the hard way(myself).
07-26-2015, 11:22 PM
#4
Registered User
Thread Starter
Join Date: Jul 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Not sure yet they will have to clear that huge trans tho. Maybe have to be a shorty style for a g8 or 10 and up camaro with the A6? Any good suggestions? I have to rework the trans tunnel for the 6l90 so I would like to doghouse the firewall back a few inches and push it all back as far as I can.
07-27-2015, 09:14 AM
#5
Teching In
Join Date: Jul 2015
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
ly6/6l90 swap into 67C10
Originally Posted by C1067
Not sure yet they will have to clear that huge trans tho. Maybe have to be a shorty style for a g8 or 10 and up camaro with the A6? Any good suggestions? I have to rework the trans tunnel for the 6l90 so I would like to doghouse the firewall back a few inches and push it all back as far as I can.