Forum searcher but new member
01-29-2016, 03:28 PM
#1
Teching In
Thread Starter
Join Date: Jan 2016
Location: Tucson, Arizona
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Forum searcher but new member Been reading forums here for quite some time. Just decided to become a member. Building a L33, trying to keep it simple. Looking at swapping the crank out for a 24x instead of just swapping the gears. Currently has the stock 58x crank with minor pitting on the front main bearing.
I want to run the DBC and found a crank with bearings for under 400. roughly the same price as micro polishing the stock 58x crank, buying bearings and getting a LINGENFELTER to run the DBC throttle body.
What sensors do I need to replace, wires to extend and valley cover to run.. doing away with all the DOD and AFM. Upgrading to LS7 lifters and Beehive springs. Want to make it a Gen3 motors in a Gen4 block.
I want to run the DBC and found a crank with bearings for under 400. roughly the same price as micro polishing the stock 58x crank, buying bearings and getting a LINGENFELTER to run the DBC throttle body.
What sensors do I need to replace, wires to extend and valley cover to run.. doing away with all the DOD and AFM. Upgrading to LS7 lifters and Beehive springs. Want to make it a Gen3 motors in a Gen4 block.
