Delagalaga!

How's it going everyone? I've been browsing this forum for a while to do research on parts and procedures for the upcoming project! We're going to be doing a cam, heads, intake, headers, and other miscellaneous things that are in arms reach while tearing down my 2000 Corvette.I was looking to get any advice that some of the experience in here could give me as this will be the first LS and top end engine surgery we've done ourselves. I figured with all the help we can get on the internet between 3 somewhat mechanically inclined weekend wrenchers we oughta figure it out! Anyway here is the fun stuff, the parts! Any recommendations or advice is welcome! Hoping to start a build thread on the process with some pics and all the good stuff!

• TSP "bald eagle" Cam[ 227/234@.050|Lobe lift .353/.353|Valve lift .600/.600| LSA 111]
• PRC as cast 225cc [TSP dual valve springs and titanium retainers]
• Comp Cams gold 1.72 rockers PN:CCA-19024-16 [got the Comp adjustable push rod to get the preload dialed in]
• LS7 hydraulic roller lifters[new trays too!]
• Kooks 1 7/8 headers + catless x pipe PN:KOK-21502400/KOK-21503100
• FAST Lsx 102 cathedral port [coolant pipe and plugs obtained!]
• Nick Williams 102 electric TB
• LS2 fuel rail
• Fast 46# Injectors PN:30462-8
• SLP blackwing
• LS2 timing chain
• Lingenfelter 160° thermostat

​​​​​​I'll do my best to keep updating as the list gets changed!

Nathan C

Welcome ! Sounds like a pretty good plan.