BMR suspension.
#1
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
Ordered a K-member and upper and lower a-arms from BMR.
The upper a-arms and the k-member were the first to arrive.
The upper a-arms had a bit of damage on them.
![](http://img801.imageshack.us/img801/4614/aarm.jpg)
The k-member driver side motor mount didn't look square to my eyes. It only measures a bit out, but it looks worse than it is. The bottom one is the original that I was sent and the top is new.
![](http://img33.imageshack.us/img33/3914/kmembercomp.jpg)
After my last experience with a suspension company, I'm going to make sure everything is correct. I talked to Lee he handled everything during one phone call. Replaced the upper a-arms outright and sent another k-member immediately.
![](http://img17.imageshack.us/img17/2430/allks.jpg)
Thanks Lee
The upper a-arms and the k-member were the first to arrive.
The upper a-arms had a bit of damage on them.
![](http://img801.imageshack.us/img801/4614/aarm.jpg)
The k-member driver side motor mount didn't look square to my eyes. It only measures a bit out, but it looks worse than it is. The bottom one is the original that I was sent and the top is new.
![](http://img33.imageshack.us/img33/3914/kmembercomp.jpg)
After my last experience with a suspension company, I'm going to make sure everything is correct. I talked to Lee he handled everything during one phone call. Replaced the upper a-arms outright and sent another k-member immediately.
![](http://img17.imageshack.us/img17/2430/allks.jpg)
Thanks Lee