Patriot Performance # 1 In My Book, Numerous Members Response
07-26-2007, 12:09 PM
#1
11 Second Club
Thread Starter
Join Date: May 2004
Location: Troy,MI.
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Patriot Performance # 1 In My Book, Numerous Members Response Just a note to let everyone know what great customer sevice Patriot
Perfomance gives. I bought a set of LS6 Stage II heads brand new in the box from a forum member. After installing them along with a new cam I began burning oil (250 miles/quart). Since I was not the original owner Patriot Performance did not have to stand behind the heads, it says so in the waranty.I called Gunnar and told him my problem and he agreed to fix the heads(guides/seals replaced).My heads are on the way back(one week turnaround) and I hope to have the car running next week.
I picked up a solid 6mph in trap speed with the H/C install and I was very happy with the power increase. I would definately buy a set of heads from this company. They sure stand behind their product. I was not happy with having to pull the heads off the car(thanks Phil), but shxx happens and it is nice to have a company stand behind their product.
THANK YOU GUNNAR
Perfomance gives. I bought a set of LS6 Stage II heads brand new in the box from a forum member. After installing them along with a new cam I began burning oil (250 miles/quart). Since I was not the original owner Patriot Performance did not have to stand behind the heads, it says so in the waranty.I called Gunnar and told him my problem and he agreed to fix the heads(guides/seals replaced).My heads are on the way back(one week turnaround) and I hope to have the car running next week.
I picked up a solid 6mph in trap speed with the H/C install and I was very happy with the power increase. I would definately buy a set of heads from this company. They sure stand behind their product. I was not happy with having to pull the heads off the car(thanks Phil), but shxx happens and it is nice to have a company stand behind their product.
THANK YOU GUNNAR
07-26-2007, 03:17 PM
#4
Great customer service and great performance...is well....great 
I'm using their stage II 243 castings and will hopefully have some new numbers soon. With the heads milled to 11.2:1, ported Fast 90/90, and a 230/234ish cam...I'm hoping be around 450ish to the ground.
I'm using their stage II 243 castings and will hopefully have some new numbers soon. With the heads milled to 11.2:1, ported Fast 90/90, and a 230/234ish cam...I'm hoping be around 450ish to the ground.
07-27-2007, 07:43 AM
#5
11 Second Club
Thread Starter
Join Date: May 2004
Location: Troy,MI.
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Xtnct00WS6
Great customer service and great performance...is well....great I'm using their stage II 243 castings and will hopefully have some new numbers soon. With the heads milled to 11.2:1, ported Fast 90/90, and a 230/234ish cam...I'm hoping be around 450ish to the ground.
I'm using their stage II 243 castings and will hopefully have some new numbers soon. With the heads milled to 11.2:1, ported Fast 90/90, and a 230/234ish cam...I'm hoping be around 450ish to the ground.How much did you mill the heads to get 11:2 C R ?