Masport of Boca Raton, FL
#1
TECH Junkie
Thread Starter
iTrader: (9)
Join Date: Apr 2005
Location: Miami, FL
Posts: 3,472
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
I had a boost leak that was hard to find at first.
No leaks deteced anywhere when I did my own boost leak test at home, so I went to see Dan at Masport where he put her on the dyno... First two runs, no leak... Third run with 3650 lb. of load, THE LEAK SHOWED UP... The BOV was set too loose... Silly right? It would come open too soon, set for too low a psi.
Well, since the car was there, why not improve it, right? After some tweaking, Dan pulled off 688 lb ft. of torque... ON A MUSTANG DYNO to boot! This was with 16 psi on pump gas and a good shot of meth.
Many SFL people complain that there's nothing around here close to home... Dan Maslic is around here and he seriously knows what he's doing. Highly recommended tuner: A+
Here's a vid and the dyno sheet:
![](http://i23.photobucket.com/albums/b361/Bboyferal/Internet%20Forum%20pics/th_DynoRun.jpg)
![](http://i23.photobucket.com/albums/b361/Bboyferal/Internet%20Forum%20pics/Dynograph.jpg)
Highly recommended with no reservation. Easy to reach, very organized, very professional... I was very impressed to say the least!
No leaks deteced anywhere when I did my own boost leak test at home, so I went to see Dan at Masport where he put her on the dyno... First two runs, no leak... Third run with 3650 lb. of load, THE LEAK SHOWED UP... The BOV was set too loose... Silly right? It would come open too soon, set for too low a psi.
Well, since the car was there, why not improve it, right? After some tweaking, Dan pulled off 688 lb ft. of torque... ON A MUSTANG DYNO to boot! This was with 16 psi on pump gas and a good shot of meth.
Many SFL people complain that there's nothing around here close to home... Dan Maslic is around here and he seriously knows what he's doing. Highly recommended tuner: A+
Here's a vid and the dyno sheet:
![](http://i23.photobucket.com/albums/b361/Bboyferal/Internet%20Forum%20pics/th_DynoRun.jpg)
![](http://i23.photobucket.com/albums/b361/Bboyferal/Internet%20Forum%20pics/Dynograph.jpg)
Highly recommended with no reservation. Easy to reach, very organized, very professional... I was very impressed to say the least!
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)