question about keyless+tire sensor
question about keyless+tire sensor anyone had problems with the keyless entry+remote start and the tire monitoring system? Both stopped working at the same time on my 07 impala ss. I have tried both remotes and with new batteries. car will not let me relearn the remotes. also tried unhooking the battery for a while. car is not throwing any codes. any ideas?
On The Tree
Joined: Jan 2008
Posts: 193
Likes: 0
there is a tsb on this forum somewhere.. if you search for it you will find it but what was mentioned above me is what needs to be replaced. Its only a problem on 06-07 years.. Mine had this issue. It didnt die but it got worst and worst as days went on..
I have searched for it but still cant find it. do you rememer what title to search under
A search of this section for "keyless service bulletin" brought me this, amongst a few other returns:
https://ls1tech.com/forums/ls4-front...m-problem.html
https://ls1tech.com/forums/ls4-front...m-problem.html
Trending Topics
yes I have way too many to keep up with! thanks for the help. I talked to a dealer and they said it was the transmitter in the dash was bad. he said it was about $100 for it. does that sound correct?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
On The Tree
Joined: Feb 2008
Posts: 153
Likes: 0
That sounds right for the receiver itself but when you get the new style receiver you still need the updates antenna and RKE's (fobs) plus it needs to be programmed with a tech2 after installation.
