Took Pics of the Monte
#22
Did you use the things from grafxwerks for the emblems or what? Also how did you do it? If it is from there, and it the liquidome stuff do you have to put the clear plastic piece over that or what?
Last edited by 06MCLTZ; 08-04-2009 at 09:00 PM.
#23
Thread Starter
Launching!
iTrader: (4)
Joined: Apr 2006
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
From: St Louis, MO
the bowties have the liquidome stuff already on them you have to take the gold bowtie out to put the new ones in i used a hairdryer and a filet knife to pry the gold bow ties out
#25
You have to take the bowtie all the way off the car to get the gold off right? Do you just use like 3M double sided tape or what?
#27
Thread Starter
Launching!
iTrader: (4)
Joined: Apr 2006
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
From: St Louis, MO
no you dont have to take the whole bowtie off just the gold part and the new bowties come with sticky stuff on them
I was thinking of doing some tint but no rims i like the ones i got now
I was thinking of doing some tint but no rims i like the ones i got now
#28
#29
Thread Starter
Launching!
iTrader: (4)
Joined: Apr 2006
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
From: St Louis, MO
i took a hairdryer and heated the whole piece up. Took a thin blade knife and placed in between the gold bowtie and the chrome outer piece. Pryed on the gold bow tie and it came out. It work the best when it was pretty hot.
#31
TECH Enthusiast
Joined: Jul 2008
Posts: 703
Likes: 0
Received 0 Likes
on
0 Posts
From: Atlanta Georgia USA
Ahhh yes! The black Montes are out & about!
you don't see many black Monte SS's!!! Well at least here around Atlanta, but you'll see alot alot of red & silver ones.......... N E Wayz.....this is a sexy car,...I agree with nacho and the others tint & lower!! I should be dropping the crusader in a the not too distant future,......
you don't see many black Monte SS's!!! Well at least here around Atlanta, but you'll see alot alot of red & silver ones.......... N E Wayz.....this is a sexy car,...I agree with nacho and the others tint & lower!! I should be dropping the crusader in a the not too distant future,......
#32
you need that bow tie off the back. here is mine. no heat gun!!!! park the car in the sunlight and use string and saw it off then take any detail spray and wipe off any residue. very easy job