Any Dyno mumbers with a Cam?
02+ LS6 cam
204/218 int/exh @ 0.05" duration
0.551" / 0.547" int/exh lift
117 LSA
I dynoed after a stage 2 intake and stage 2 heads so my numbers were not entirely from the cam. Apparently we cant gain with a cam unless we go with a new intake. But anyway, Without knowing whether i lost power from the heads or messed the geometry up by using 1.8 rockers, i would say go with a much more aggressive cam.
If you are not going to keep DOD i would say something a lot more aggressive would be good considering the ls6 ran like stock without a tune. Also if you put a large cam in it and it doesn't idle it can prolly be tuned to idle well so thats not a big deal.
If i could do it again i would go much more aggressive.
Trending Topics
The Best V8 Stories One Small Block at Time


