LS1 vs LS4
With 1.85 SLP roller rockers I am at .523 and .533 for lift with these heads. One of those numbers is for the DOD side (I have dod off) but I can't remember which one right now. Even with our LS6 heads we still have LS1 springs on them. I would not reccommend going to much higher than I am with stock pushrods. I even put in oil restricted ones for that purpose. I have had great results with these rockers and this set-up. I need to get to the track to see what she'll do.
-Mike
-Mike
I think if travis could get on a pass at the track cutting a 1.8 1.9 he should be around a 12.7x around 107-109 car runs strong. And no traviss I wont be out this weekend lol! Going camping hopefully, so lets say the 15th or the 16th.
It reeeeaaaaallllyyyyy would be nice to know what mods he has on that car of his. Oh, and by March of next year we'll own a Monte SS too. The wife really wants one. Then comes the Vette..... He, he, he...
-Mike
-Mike
please refer to this thread 
it was a very sarcastic remark haha
https://ls1tech.com/forums/ls4-front...ran-g8-gt.html
it was a very sarcastic remark hahahttps://ls1tech.com/forums/ls4-front...ran-g8-gt.html
please refer to this thread it was a very sarcastic remark haha
https://ls1tech.com/forums/ls4-front...ran-g8-gt.html
it was a very sarcastic remark hahahttps://ls1tech.com/forums/ls4-front...ran-g8-gt.html
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Also for anything aftert the 1/8th to be "boring" you sure have seem to take a liking in running 1/4 mile.
When did I call tiny out? lol He beat me a couple weeks ago, it's not like I'd do any better now.
With 1.85 SLP roller rockers I am at .523 and .533 for lift with these heads. One of those numbers is for the DOD side (I have dod off) but I can't remember which one right now. Even with our LS6 heads we still have LS1 springs on them. I would not reccommend going to much higher than I am with stock pushrods. I even put in oil restricted ones for that purpose. I have had great results with these rockers and this set-up. I need to get to the track to see what she'll do.
-Mike
-Mike
02-26-2007, 04:00 PM #60
Quote:
BADDLS1SS
Mine would start to float about 6200 with the stock springs bad enough to hesitate and misfire after the rockers.
I had changed over to the 918 springs and the push rods and was able to extend my shift point for the 1-2 all the way to 6500. I did notice a pretty large gain in torque under the curve after doing the springs, so obviously the stock springs were not working so hot after the rockers alone.
https://ls1tech.com/forums/ls4-front...tall-pics.html How could we all forget this guy?
There may be more do to it by now, too. 
But seriously, we all know automatics run quicker in the 1/4 which is why your bolt-on car is so quick. Put it on the street on regular tires, or from a roll and it'd be a damn good race. After all, you trapped the same as the car in the video running .8 faster. It's all in the 60', which LS4 cars don't have.
Not trying to be a dick, but where's your proof of a full bolt-on vs full bolt-on?
BTW, I know true bolt-on A4 F-bodies in the 10s. There's always an exception to the rule.
If you're just playing devil's advocate, I'm sorry. But it's like beating a dead horse with LS1 guys in this section.