Fwi lean code
I agree, get hptuners. The stuff you listed is easy, the hardest thing on there is tuning the maf, but with some knowledge its easy.
I would probably add to that list: lean out commanded PE a/f ratio and change shift points.
I would probably add to that list: lean out commanded PE a/f ratio and change shift points.
It sets the target AFR during high load, open loop operation. (The factory raped to PE table - mine looked like the Rocky Mountains until fixed.) Factory setting gets as rich as ~10.8:1 which is way to rich for best torque.
Yeah as far as I know all the LS4's have the same PE fuel curve. At least all the ones I've seen.
Just remember brian, boosted cars like to run more rich than N/A cars. Should be around 11.0-11.5.
Just remember brian, boosted cars like to run more rich than N/A cars. Should be around 11.0-11.5.
