Gxp 9006 h.i.d's HELP!!!
Thread Starter
Staging Lane
Joined: Oct 2010
Posts: 81
Likes: 0
From: macomb,mi
Gxp 9006 h.i.d's HELP!!! I know there's probaly a thread on here somewhere but I couldn't find it:/ I just got my hids lows and fogs. I got the fogs working perfect(jus needed a bigger fuse 30A) but I cannot get my 9006 low beams to work. I have the relay but they just won't turn on and wen I had em goin a little they flickered. Really need some help on this I want these bad boys installed asap B-)
Some guys will say yes and some guys will say no. With the 35w, you really don't "need" to have a relay. But some guys do it anyways for peace of mind. The cost of the relays provide cheap insurance. If you are using the 55w, yes you need the relay.
Thread Starter
Staging Lane
Joined: Oct 2010
Posts: 81
Likes: 0
From: macomb,mi
I'm running the 35 watts I jus don't get how to hook em up. Say I don't use the relay how would I go about hookin em up I'm not sure which plus they want me to switch around...sorry I'm a noob on electrical I just want to learn instead of takin it in
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Apprentice
Joined: Dec 2010
Posts: 383
Likes: 1
Yes daytime running lights will be very hard on your bulbs and ballasts.
Hids do NOT like being turned on and off repeatedly , search "disable drl" and theres a good thread on doing it on a gxp (as we dont have a fuse to pull).
Which kit are you using.
Hids do NOT like being turned on and off repeatedly , search "disable drl" and theres a good thread on doing it on a gxp (as we dont have a fuse to pull).
Which kit are you using.
i have been running them in the gxp for 6mo with no problems just shut em off when you get in, did you hook up the polarity right on everything and did you hook up the lead plug to the oem harness, grounding issues, get the test light out its not that big of a deal to back trace just dont probe the bulb wires
just as a side note i had issues with mine not firing last year and it came out to be the relays that come with the ebay harness are ****, it was rusted out inside when i popped it open, buy a quality relay with the epoxy base not one that snaps together
just as a side note i had issues with mine not firing last year and it came out to be the relays that come with the ebay harness are ****, it was rusted out inside when i popped it open, buy a quality relay with the epoxy base not one that snaps together
