CCFL Halo Projector Headlights
04-30-2011, 07:52 AM
#1
Teching In
Thread Starter
Join Date: Apr 2011
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
CCFL Halo Projector Headlights Hey guys I just bought some CCFL Halo Projector Headlights on Ebay. Any good information you guys can give me on installing them and such, very appreciated 
Thanks!
Thanks!
04-30-2011, 10:13 AM
#2
TECH Enthusiast
iTrader: (1)
Join Date: Jul 2009
Location: Sa, TX
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
Ive had mine since September no problems and love them. As for the install it was pretty easy. Just plug and play, i tried with out looking for any advice add did just fine took me about 45min at the most. Post some pictures when your done!
04-30-2011, 11:37 AM
#3
Launching!
Join Date: Mar 2010
Location: Buffalo, NY
Posts: 237
Likes: 0
Received 0 Likes
on
0 Posts
Buy silicone adhesive sealant from lowes(loctite makes a tube for 2.50 that is good) and seal where the clear lens of the headlight, and the black backing of the headlight meet, that way you won't have the moisture problem that is somewhat common on them
04-30-2011, 12:00 PM
#4
TECH Addict
iTrader: (15)
Join Date: Aug 2002
Location: 78°14′46″N 15°27′56″E
Posts: 2,419
Likes: 0
Received 5 Likes
on
5 Posts
It's pretty straightforward...There's a screw and a clip on each light. You can have each side out in about 3 minutes.
A warning about these lights, though. Many people which have used aren't satisfied with the output and pattern. I tried them with and without HIDs, and they simply did not put out enough light in the right places. Of course, I live in wilderness, and need a lot of light for our unlit roads.
A warning about these lights, though. Many people which have used aren't satisfied with the output and pattern. I tried them with and without HIDs, and they simply did not put out enough light in the right places. Of course, I live in wilderness, and need a lot of light for our unlit roads.
04-30-2011, 12:18 PM
#5
TECH Enthusiast
iTrader: (1)
Join Date: Jul 2009
Location: Sa, TX
Posts: 646
Likes: 0
Received 0 Likes
on
0 Posts
I didnt actually buy the ones from ebay, and havent had any moisture problems but id do it just in case. And LS1 Racing is just bragging about having them out in 3 min 
