NEWB from Iowa
10-04-2011, 09:15 PM
#1
Teching In
Thread Starter
Join Date: Dec 2004
Location: Iowa
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
NEWB from Iowa Hey everyone I am a fresh GXP owner. Its a 2006 with the monsoon system and navigation system. I have owned the car for three days and replaced the right front suspension. It was a right front hit and so I need a fender and a new right front rim. I have a few questions that I have spent hours searching over no joke.
1. Who makes good aftermarket fenders?
2. Any good places I can find front bags and aur bag control module (i know there are four options)
3. Who makes the best cold air intake since I have read some people hate the K and N
4-5 I wanted to get four new KV5's but 1 call to tire rack says they dont carry them for the car even though I see them on GXP's in GMLS4. A place in detriot has reman alcoas for 425 a piece.
Is it true that wheel specs are...
40mm offset in front, 8"
55mm offset in back 7"
5x115 bolt pattern
6. I know I need a trans cooler and the cars dont come with a spare. But any cars beside the buick super work for a spare?
Thanks in advance,
Jake/
1. Who makes good aftermarket fenders?
2. Any good places I can find front bags and aur bag control module (i know there are four options)
3. Who makes the best cold air intake since I have read some people hate the K and N
4-5 I wanted to get four new KV5's but 1 call to tire rack says they dont carry them for the car even though I see them on GXP's in GMLS4. A place in detriot has reman alcoas for 425 a piece.
Is it true that wheel specs are...
40mm offset in front, 8"
55mm offset in back 7"
5x115 bolt pattern
6. I know I need a trans cooler and the cars dont come with a spare. But any cars beside the buick super work for a spare?
Thanks in advance,
Jake/
10-05-2011, 06:12 AM
#4
Teching In
Thread Starter
Join Date: Dec 2004
Location: Iowa
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
I seen where the buick lacrosse super fits for the front not having any spare sucks.
http://www.coldairinductions.com/sto...oated-black-62
http://www.coldairinductions.com/sto...oated-black-62
Last edited by Deimos; 10-05-2011 at 06:21 AM.
10-05-2011, 11:22 AM
#5
thats it. i got an the bare aluminum one used for cheap and painted it black for my car
10-05-2011, 05:24 PM
#7
