Group Purchase on headers
#42
Staging Lane
Join Date: Mar 2012
Location: Superior, WI
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
I may be interested. Is this a fairly easy do-it-yourself or is it something where if I have to ask, I should take it to a shop to do? What do shops charge to install these?
#44
Launching!
iTrader: (9)
speaking from experience of doing the SD Headers on my 99 Park Ave...there being less space in this bay with a V8 and a smaller car as opposed to the v6 and larger vehicle...
it's gonna suck. Tedious, frustrating to someone that's never done a set before, and you'll prolly wanna punch a child.
From what i can gather they are a true drop in though which saves some of the work. if you make sure to clean all gasket surfaces well and remember ultra copper is your friend you can do this in an afternoon as stated.
Get the car about 2-3ft off the ground for installing the rear and that's about it. rear first since it has the crossover as well. it's a lot easier to try to tweak the front into the crossover if it needs it than to try tweaking the back.
it's gonna suck. Tedious, frustrating to someone that's never done a set before, and you'll prolly wanna punch a child.
From what i can gather they are a true drop in though which saves some of the work. if you make sure to clean all gasket surfaces well and remember ultra copper is your friend you can do this in an afternoon as stated.
Get the car about 2-3ft off the ground for installing the rear and that's about it. rear first since it has the crossover as well. it's a lot easier to try to tweak the front into the crossover if it needs it than to try tweaking the back.
#49
Staging Lane
Join Date: Mar 2012
Location: Superior, WI
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Well, Sadden, I guess I was afraid of that.
Please count me in. How does payment and actually placing the order work?
Please count me in. How does payment and actually placing the order work?
Last edited by UseAsDirected; 04-03-2012 at 05:21 PM.
#55
Teching In
Join Date: Apr 2012
Location: Saint Paul, MN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Hey add me too
so the Imp's in the shop getting a new tranny and I figure why not get a some DT headers to go with the new tranny. ha ha and a cooler this time... but Im in too... Send me the info.
2nd post but my only other post is in the broken tranny thread and I've been trolling the forums for years now and I had to make a name to get in on this buy!
2nd post but my only other post is in the broken tranny thread and I've been trolling the forums for years now and I had to make a name to get in on this buy!