lVloses

iTrader: (1)

So what's the best way to install them? I was going to use the ZZP DP and weld them to my DTH Headers. Where did you get the flange at to weld onto the Headers?

ProCompSolutions

I forgot to ask But are these Cat or Non Cat Headers?

lVloses

iTrader: (1)

The headers don't have the cat in them, the down pipe does. So when you're installing them you can either use a new DP without a cat or you can use a new DP with a cat/your old DP.

ProCompSolutions

Ya sorry didnt mean to sound like a NOOB but i ment was can i use my Stock DP with Cat with these

lVloses

iTrader: (1)

You can, but your stock down pipe is the worst part about your exhaust (shrinks down to 2" at the smallest I believe) so by doing headers alone you won't really see gains. If I were you I'd just get a catted down pipe and put it on at the same time you do your headers so you see gains and it won't cost as much in labor. Plus you can sell your old cat for a few bucks.

neilownz

You have to cut it before the upward bend or use a new pipe.

UpstateImpala

Can I still get in on the order or have you already got the 15 people you needed?

lVloses

iTrader: (1)

Never hurts to call and see.

critical.in.ga

is there ne word on when these r gonna be done? im itchin to get these on the car

Sadden

I think it was supposed to be towards the end of may , icr for sure , call nick if you wanna know bad enough.

UpstateImpala

Nick at DT correct? What is his last name or position so I know who to ask for.

Sadden

Call the number posted at the start of this thread , and ask for nick , odds are good you will get him first thing..

Gripenfelter

iTrader: (1)

I've been trying to get a hold of Nick to no avail. Anyone get him on the phone?

Pretty busy guy.

SeweRat

Bump for any info.

Gripenfelter

iTrader: (1)

Y-pipe sections are done.

Headers are being welded now.

Maybe 2 more weeks?

SeweRat

Bump from pg.2 for any info.

UseAsDirected

Just talked to Nick. He hopes to ship at the end of this week!

SeweRat

Thanks! Hope everyone had a Happy 4th.

lVloses

iTrader: (1)

Anyone know if the flex coupler is fixed on this batch?

UseAsDirected

Checked with Nick again today and he said my headers shipped on 7/11!