91parkave

iTrader: (4)

Its not hard to take them out and tint them and BTW might be a good idea Paint your grilles all black instead of the chrome ring

99corvette

iTrader: (12)

Are those OEM replacements? Mine are cloudy also. Where did you get them and how much?

91parkave

iTrader: (4)

Amazon eBay....

Ackbar00

How would you go about tinting them? Is there a paint or something? EDIT Maybe something like this?
http://store.ijdmtoy.com/Smoked-Head...ilm-aa2042.htm


Yeah, been looking at painting the chrome rig, might work on that as well.

Still trying to find time to do the cooler and stuff, just really busy week, 3 birthdays in my family this week!

91parkave

iTrader: (4)

You can just use the vht tint they sell at Autozone orielleys if your interested I'll post a writeup for you to go by its easy.

Ackbar00

I just bought some on Ebay for $8. But yeah, that would be cool if you dont mind.

91parkave

iTrader: (4)

I'd just use 1 coat on your parking lights

http://www.grandprixforums.net/how-v...hts-30474.html.

Ackbar00

I bought the tint film kind:

http://www.ebay.com/itm/Gloss-Black-Dark-Smoke-Headlight-Taillight-FogLight-Tint-Film12-x-36-1ftx3ft-/221219138813?_trksid=p2047675.l2557&ssPageName=STRK%3AMEWNX%3AIT&nma=true&si=XxH7fyNocRzTVm74uMpcYKP%252FDpg%253D&orig_cvip=true&rt=nc
Figured it should be good enough for the parking lights.

blkchevyz

nice write up on the nightshades stuff.

Ackbar00

Pulled the trigger today on a Lewtune. Have that coming as well now.

91parkave

iTrader: (4)

Thought u had HP tuners?

Ackbar00

That is what my tuner of my turbo stang uses. He hadnt done a LS4 before, so I elected to go this route instead.

91parkave

iTrader: (4)

Its not like were worlds apart but HP tuners offers way more adjustability but given you don't tuning yourself diablo is probably your best option

Ackbar00

Got the parking light tint on. Thought it worked out OK.






Flipped the upper MM as well. If anything, I hear a lot more clunking when moving from a dead stop. Need to check into it more, it might be because of this or not.


Got the InTune, but sure enough it was not plug and play for my car, got this message:
Please email the PCM_UnknownBackup file to support@diablosport.com

So I did, just have to wait and see what they say.

Cory1750

That's strange, my car clunks too since I did that. Only when it is cold though. It drives fine but when I back out of my driveway and shift into drive there is a thump when I give it gas. I don't know what the cause is though.

91parkave

iTrader: (4)

I'm betting your lower engine mounts are shot of your alternator pulley is below where the strut tower is your motormount are in need of replacment

Ackbar00

Custom Poly lower engine/trans mounts - What did you do here 91parkave?

91parkave

iTrader: (4)

Window welded and lock wired there's a old thread I did on here

blkchevyz

recently started getting that as well.
sure wish i would of thrown some new mounts in when i did the transmission.

Ackbar00

So where did you get this mount from and what did it cost? I didnt see a pic of your poly mount on the other side.