Audio in
I did this quite a while ago on my 05. Should be the same as far as I know.
http://www.clubgp.com/newforum/tm.asp?m=5098873
http://www.clubgp.com/newforum/tm.asp?m=5098873
I used a PAC AAI-GM12 for my Monsoon system. It was some thread I read on here for the instal. Just had to run a power wire to the passenger side fuse panel. Other than that, it was pretty easy from what I remember.
http://www.ebay.com/itm/NEW-PAC-AAI-GM12-AUX-INPUT-FOR-2003-2005-GM-VEHICLES-/171190032847?pt=LH_DefaultDomain_0&hash=item27dbb899cf
http://www.ebay.com/itm/NEW-PAC-AAI-GM12-AUX-INPUT-FOR-2003-2005-GM-VEHICLES-/171190032847?pt=LH_DefaultDomain_0&hash=item27dbb899cf
Trending Topics
Thread Starter
TECH Enthusiast
iTrader: (15)
Joined: Jan 2010
Posts: 552
Likes: 0
From: Lawrence, KS
^thats what I'm looking for is to leave the factory setup as is and add an input. I did a complete stereo build on my TA and don't want to spend that much again lol
My bluefusion uses the xm input. It's ghetto and only syncs with my phone properly some of the time. I had to pull a xm fuse and use the non xm wire harness to get it working. Well it might have worked with the long *** cable to the trunk, but I don't subscribe anyway so this was the better option for me.


