Magnaflows On!
Thread Starter
On The Tree
Joined: Sep 2007
Posts: 164
Likes: 0
From: Dayton, OH
Magnaflows On! Got the Magnaflow Catback system at autoanything.com for $600 with free shipping
Only problem I have is the driver side muffler hangers are short and almost falling out of the rubber hangers. I might just need to adjust it though.
Videos:
http://www.youtube.com/watch?v=N2hO4xWsakM
http://www.youtube.com/watch?v=QAAN1jLckwQ
Only problem I have is the driver side muffler hangers are short and almost falling out of the rubber hangers. I might just need to adjust it though.
Videos:
http://www.youtube.com/watch?v=N2hO4xWsakM
http://www.youtube.com/watch?v=QAAN1jLckwQ
Last edited by heavyft; Aug 3, 2008 at 02:02 AM. Reason: add video links
Staging Lane
Joined: Jul 2008
Posts: 52
Likes: 0
From: Philadelphia, PA
Yes indeed, it gets louder. I installed mine this past Thursday and when we fired it up in the garage it was like sweet music to my ears. It had that low rumble that reverberated in the garage. It's the only GP that I've heard sound like that in Philly. I bet you I'll there will be plenty more GP putting them on and running around Philly, soon.
Believe me, I don't need it louder then it is. It's just right for me.
Believe me, I don't need it louder then it is. It's just right for me.
On The Tree
Joined: Jan 2008
Posts: 193
Likes: 0
hey, i had the same problem you had with my driver side muffler being too far in where it was falling off the rubber hanger. it was bad that when i was driving, it would inch it way off the hanger but not falling off thank goodness.. I couldnt take having to look like an idiot checking my muffler everywhere i stopped when i was on the road. i tried adjusting the pipe but couldnt get it to work out.. So i called my local muffler shop and they welded on a small washer onto the muffler bars where the hangers go so the rubber hangers wont slide off anymore.. I had the exhaust for over 4 months now and its still working fine..
Trending Topics
TECH Apprentice
Joined: Feb 2008
Posts: 312
Likes: 0
From: Waterloo, Illinois
I just put on my magnaflow cat-back this weekend also. I am completely in love with it. A quick question though. I just installed the K&N intake also. Do I have to unplug my battery for the computer to learn? or will it learn on it own?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
On The Tree
Joined: Sep 2007
Posts: 164
Likes: 0
From: Dayton, OH
I had the y pipe shoved in too far so after pulling it out a little it held on the hangers fine.
EXTRA I put a piece of fuel line and a small radiator hose clamp on the hanger to keep it from sliding off before I adjusted it out.
EXTRA I put a piece of fuel line and a small radiator hose clamp on the hanger to keep it from sliding off before I adjusted it out.
Put mine on last weekend as well. Have to say I'm not that impressed. It's certainly loud enough (actually too loud for my taste when accelerating) and sounds great at idle. Cruising down the highway it sounds too much like a sick tractor when DOD is engaged - the V4 drone really gets on my nerves.
