12565308 02-04 LS6 Cam FS
10-15-2008, 10:46 AM
#1
TECH Enthusiast
Thread Starter
iTrader: (22)
Join Date: Oct 2003
Location: Slinger WI
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
12565308 02-04 LS6 Cam FS Approx 10K miles on it and 4 years old, Was bought new and installed into an LS1 and thats where it accumulated most the miles before a larger upgrade. Used it in my LS4 Monte for 200 miles but didnt play well with the DOD and didnt get the gains i hoped for so i remived it.
This is the production cam for the 2002-2004 LS6 Corvette. It features .550" intake and exhaust lift, 218 degree exhaust duration and 204 degree intake duration at .050", and 117.5 degree lobe centers. Typically Comp 918 or Yellow LS6 valve springs are the upgrade needed with this cam. You will possibly need 7.425" pushrods to use this in an LS1 that doesnt have the longer valve stems of the LS6 spec "243" heads to control valve train noise.
Very nice condition cam, these retail for about 260-290 new.
http://paceperformance.com/index.asp...D&ProdID=73063
The cam can be I.D.'d by the partial part # on the butt, "5308" (12565308)
175$ Shipped.
This is the production cam for the 2002-2004 LS6 Corvette. It features .550" intake and exhaust lift, 218 degree exhaust duration and 204 degree intake duration at .050", and 117.5 degree lobe centers. Typically Comp 918 or Yellow LS6 valve springs are the upgrade needed with this cam. You will possibly need 7.425" pushrods to use this in an LS1 that doesnt have the longer valve stems of the LS6 spec "243" heads to control valve train noise.
Very nice condition cam, these retail for about 260-290 new.
http://paceperformance.com/index.asp...D&ProdID=73063
The cam can be I.D.'d by the partial part # on the butt, "5308" (12565308)
175$ Shipped.
