403ci LS2 comlete engine with 6-Speed Trans!!! FOR SALE!!
11-27-2008, 11:27 PM
#1
On The Tree
Thread Starter
iTrader: (47)
Join Date: May 2005
Location: Indiana
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
403ci LS2 complete engine with 6-Speed Trans!!! FOR SALE!! Selling my 403ci. LS2 with 6-speed trans complete minus engine harness and pcm. Wanting to go down grade. Never been dynoed so I do not have any #'s. I think the compression ratio was 11.1 to 1 don't hold me to that. Car has not been ran hard, never raced. It's in my convertible. I built the motor just to build it pretty much
Engine 403ci. LS2 aluminum block only has roughly 400-500 miles on it. Still in car, can hear run.
all accesories. minus ac compressor
All Sensors
K1 Crankshaft (Speed Inc.)
Diamond Pistons Flat top -2cc Valve Relief 1.5mm Top Ring, 3.0mm Oil Ring(Speed Inc.)
Compstar Rods with ARP 2000 Rod Bolts 6.125" (Speed Inc.)
TR Camshaft 248/254 614/620 110 lsa
LS7 Lifters
TSP Pushrods
Clevitte Rod Bearings
Patriot Performance Dual Valve Springs/ Retainers .650 lift
Stock Rockers
Stock 243 LS6 Heads
SLP Oil Pump
ASP Underdrive Pulley / Alt. Pulley
MSD Plug Wires
Prothane Motor Mounts
Intake/Fuel
Stock LS6 Intake
Stock TB
42lb Green top injectors
Nasty Performance 3/8" Polished Fuel Rails
1 3/4" Pacesetter Longtubes & O2 Sensors
Aeromotive Fuel Pressure Regulator with Gauge
Trans.
T-56
Centerforce Dual Friction Clutch
B&M Short Throw Shifter
$6,800.00 + shipping / Pick up also available / Reasonable offers considered.
I can also accept Credit Cards through my business.
Have any questons please feel free to pm me or call me (765)265-1038
Thanks, Joey
Engine 403ci. LS2 aluminum block only has roughly 400-500 miles on it. Still in car, can hear run.
all accesories. minus ac compressor
All Sensors
K1 Crankshaft (Speed Inc.)
Diamond Pistons Flat top -2cc Valve Relief 1.5mm Top Ring, 3.0mm Oil Ring(Speed Inc.)
Compstar Rods with ARP 2000 Rod Bolts 6.125" (Speed Inc.)
TR Camshaft 248/254 614/620 110 lsa
LS7 Lifters
TSP Pushrods
Clevitte Rod Bearings
Patriot Performance Dual Valve Springs/ Retainers .650 lift
Stock Rockers
Stock 243 LS6 Heads
SLP Oil Pump
ASP Underdrive Pulley / Alt. Pulley
MSD Plug Wires
Prothane Motor Mounts
Intake/Fuel
Stock LS6 Intake
Stock TB
42lb Green top injectors
Nasty Performance 3/8" Polished Fuel Rails
1 3/4" Pacesetter Longtubes & O2 Sensors
Aeromotive Fuel Pressure Regulator with Gauge
Trans.
T-56
Centerforce Dual Friction Clutch
B&M Short Throw Shifter
$6,800.00 + shipping / Pick up also available / Reasonable offers considered.
I can also accept Credit Cards through my business.
Have any questons please feel free to pm me or call me (765)265-1038
Thanks, Joey
Last edited by 765joey; 12-06-2008 at 01:46 AM. Reason: Forgot to add the LS7 Lifters
11-27-2008, 11:50 PM
#2
10 Second Club
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
I noticed you had stock ls6 heads on it! Did you have them ported or any work at all done to them?
Also is $7100 your bottom dollar?
I see also that you only have 400-500 miles on it. That makes me wonder exactly why your selling it so soon. Interested in this... But would like to know a little more about it. And did you build it or a shop build it??? Sorry for so many questions.
James
PM me with details if you'd like!
Also is $7100 your bottom dollar?
I see also that you only have 400-500 miles on it. That makes me wonder exactly why your selling it so soon. Interested in this... But would like to know a little more about it. And did you build it or a shop build it??? Sorry for so many questions.
James
PM me with details if you'd like!
Trending Topics
11-30-2008, 12:12 AM
#9
10 Second Club
iTrader: (66)
Join Date: Mar 2007
Location: Indianapolis, IN
Posts: 1,378
Likes: 0
Received 0 Likes
on
0 Posts
Might have a Trans AM, So I'm going to pass on this for now man! But thanks anyways. Also; Good Luck on the sale!
Just wanted you to know, I Don't like leaving people wondering!
James
Just wanted you to know, I Don't like leaving people wondering!
James
12-01-2008, 10:02 PM
#15
