***Narrowed Moser 9" - 2 x TC67 Turbos - 2 x 38mm Turbosmart WG's***
12-11-2008, 12:47 AM
#22
On The Tree
Thread Starter
iTrader: (31)
Join Date: Feb 2005
Location: Van Buren, AR
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Let me look at this tomorrow when I don't have iciciles hanging from my nose and I'll get back with you. I think there is not an issue though because the backing plates have one side cut out of them to fit over the axles and doesn't require sliding them over from the end. I'll get some more pics of it tomorrow and post them up to clarify. For quick reference though, it is similar looking to the backing plate that is in the picture of the Wilwood parking brake setup....it looks like a C and has the 4 mounting holes in it.BUMP UP! PRICE HAS BEEN DROPPED.....need to get this thing to move!
Last edited by 93BlackBeast; 12-11-2008 at 12:57 AM.
12-11-2008, 09:47 AM
#23
TECH Fanatic
iTrader: (45)
Join Date: Sep 2006
Location: Clarksville, TN
Posts: 1,122
Likes: 0
Received 0 Likes
on
0 Posts
Magic Let me look at this tomorrow when I don't have iciciles hanging from my nose and I'll get back with you. I think there is not an issue though because the backing plates have one side cut out of them to fit over the axles and doesn't require sliding them over from the end. I'll get some more pics of it tomorrow and post them up to clarify. For quick reference though, it is similar looking to the backing plate that is in the picture of the Wilwood parking brake setup....it looks like a C and has the 4 mounting holes in it.
Let me look at this tomorrow when I don't have iciciles hanging from my nose and I'll get back with you. I think there is not an issue though because the backing plates have one side cut out of them to fit over the axles and doesn't require sliding them over from the end. I'll get some more pics of it tomorrow and post them up to clarify. For quick reference though, it is similar looking to the backing plate that is in the picture of the Wilwood parking brake setup....it looks like a C and has the 4 mounting holes in it.
12-11-2008, 10:10 AM
#24
On The Tree
iTrader: (22)
Join Date: Jul 2004
Location: Southern Indiana
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
I am definitely interested, but the price is a little higher than I had hoped to pay. Shoot me an email at mjmcmillin@yahoo.com with your best price if you are willing to take less.
12-11-2008, 01:15 PM
#25
On The Tree
Thread Starter
iTrader: (31)
Join Date: Feb 2005
Location: Van Buren, AR
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
I am definitely interested, but the price is a little higher than I had hoped to pay. Shoot me an email at mjmcmillin@yahoo.com with your best price if you are willing to take less.
479-420-5347
Cody B.
Also,
T Raven,
Jose at Forced Inductions got back to me and said that Turbonetics does not have any compressor maps for any of their turbos that are available to the public. If anything changes, he'll let me know. Sorry about that.
But these would definitely be good to 750-800 and would spool up great. AND you'd have two setups for two cars.
Let me know if you are still interested.
12-11-2008, 01:23 PM
#26
I'll have to check out their website and see what I think, I'd just hate to have a turbo that's too big for what I want to do. I still need to learn more about choosing the right turbo. I understand the math involved to plot points on a compressor map, but we all know that theories and real world results are often two different things. thanks.
12-19-2008, 03:29 PM
#33
On The Tree
Thread Starter
iTrader: (31)
Join Date: Feb 2005
Location: Van Buren, AR
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Updated Info I added some information about the turbos.
The Turbines are an F1-Strim, 67mm HP comp wheel, and .81A/R T4's.
I know someone needs these
The Turbines are an F1-Strim, 67mm HP comp wheel, and .81A/R T4's.
I know someone needs these
12-19-2008, 06:54 PM
#36
Staging Lane
iTrader: (5)
Join Date: Jun 2005
Location: Poteau, OK
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
Dang Cody. Are you ever going to get that car done? Anyone that is thinking about these, Cody is stand up guy. Good Luck with the sale. Wish I was at the point I needed them for my truck.
12-20-2008, 01:52 AM
#37
On The Tree
Thread Starter
iTrader: (31)
Join Date: Feb 2005
Location: Van Buren, AR
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Lol...I tell ya Dane..If I EVER get this car done...that will be the day
Gotta quit changing my mind so much... thats the bottom line...anywho, my motor is done now over at Scott's and I'm tearing apart the old motor tomorrow to get ready for the machine shop...
Thanks for the bump man, and we can definitely throw these on ol' whitey and ditch the spray, you just let me know when!
Bump for the night!
Oh, and I'll let you know if a buyer comes through for the other Wastegate.
Thanks,
Cody B.
Gotta quit changing my mind so much... thats the bottom line...anywho, my motor is done now over at Scott's and I'm tearing apart the old motor tomorrow to get ready for the machine shop...
Thanks for the bump man, and we can definitely throw these on ol' whitey and ditch the spray, you just let me know when!
Bump for the night!
Oh, and I'll let you know if a buyer comes through for the other Wastegate.
Thanks,
Cody B.
12-22-2008, 01:30 PM
#40
Staging Lane
iTrader: (5)
Join Date: Jun 2005
Location: Poteau, OK
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
I got too much compression for hairdryers like that. Plus I just dropped about 2K on tranny parts so I'm on the poorhouse. For that price one of these guys ought jump on these.
I'll send you some pics of my broke output shaft. Quite nice if I do say so myself.
I'll send you some pics of my broke output shaft. Quite nice if I do say so myself.