MSD 6010, Coil Packs, and Plug wires
01-03-2009, 10:51 PM
#1
MSD 6010, Coil Packs, and Plug wires MSD 6010 - NEVER engergized, used for mock-up only. Harness included but has been slightly modified - if you look at the harness here
http://www.msdignition.com/uploadedF...structions.pdf
The keyed 12+, ground, and tach output have been relocated to right at the plug going into the controller. This allows the controller to be mounted inside the car, and only underhood wiring to be to the coil packs, cam and crank sensors. NOTE - I cannot find, but will look for the timing modules. I have the serial connection cable, ProData software can be downloaded from MSD's site.
Also have stock 02 coil packs with brackets and harness, with MSD plug wires. Coils have about 35K miles on them, plugwires about 5K.
SOLD
http://www.msdignition.com/uploadedF...structions.pdf
The keyed 12+, ground, and tach output have been relocated to right at the plug going into the controller. This allows the controller to be mounted inside the car, and only underhood wiring to be to the coil packs, cam and crank sensors. NOTE - I cannot find, but will look for the timing modules. I have the serial connection cable, ProData software can be downloaded from MSD's site.
Also have stock 02 coil packs with brackets and harness, with MSD plug wires. Coils have about 35K miles on them, plugwires about 5K.
SOLD
Last edited by ATwelveSec02Z28; 01-05-2009 at 11:55 PM.
01-04-2009, 06:50 PM
#5
Cannot find the timing modules - Also wouldnt recommend using them as I understand all the modules have too much timing. I do have the serial cable so the unit can be programmed by laptop. Programming by laptop also allows you to use the 2-step, and retard functions.
Box and harness only new from summit is $320, I can do $225 shipped
Box and harness only new from summit is $320, I can do $225 shipped
