FAST 90, ported,shaved--aftermarket fuel rails
#1
![Exclamation](https://ls1tech.com/forums/images/icons/icon4.gif)
Fast 90mm,
It was ported by me. I took all the flashing and smoothed out the area at the injectors. I also cleaned it all out and smoothed it where it transitions to the runner. I also opened it up at the mouth. I spent alot more time than was needed to insure a great job. I am only selling it because I am going forced induction and dont think the intake is ideal to run over 20psi of boost. The intake has the FAST logo's shaved and it has been sanded smooth. I had it painted at a local body shop but the paint did not adhered all that well. although it was 2 years ago that it was painted and a magic marker would do wonders to tough it up. I tried to take some pictures of the inside but it didnt work out well. Please see the areas that the paint flaked off. The intake was dirty and I didnt wipe it off well enough, thats why there are some dull spots. The intake is drilled and tapped for a direct port. It does not come with the throttle cable bracket that is installed. It does come with either the fast bolt set or a stock bolt set. $700 plus shipping and paypal
****FUEL RAILS ARE SOLD*******
I do have a set of Professional Products "Aeromotive Style" Fuel Rails I never installed that I bought used. I would sell them for $75 plus shipping and paypal. Please notice in the pictures there are some parts of the rail that were marred during assembly.
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04127.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04128.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04129.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04150.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04149.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04147.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04146.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04145.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04144.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04143.jpg)
It was ported by me. I took all the flashing and smoothed out the area at the injectors. I also cleaned it all out and smoothed it where it transitions to the runner. I also opened it up at the mouth. I spent alot more time than was needed to insure a great job. I am only selling it because I am going forced induction and dont think the intake is ideal to run over 20psi of boost. The intake has the FAST logo's shaved and it has been sanded smooth. I had it painted at a local body shop but the paint did not adhered all that well. although it was 2 years ago that it was painted and a magic marker would do wonders to tough it up. I tried to take some pictures of the inside but it didnt work out well. Please see the areas that the paint flaked off. The intake was dirty and I didnt wipe it off well enough, thats why there are some dull spots. The intake is drilled and tapped for a direct port. It does not come with the throttle cable bracket that is installed. It does come with either the fast bolt set or a stock bolt set. $700 plus shipping and paypal
****FUEL RAILS ARE SOLD*******
I do have a set of Professional Products "Aeromotive Style" Fuel Rails I never installed that I bought used. I would sell them for $75 plus shipping and paypal. Please notice in the pictures there are some parts of the rail that were marred during assembly.
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04127.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04128.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04129.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04150.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04149.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04147.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04146.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04145.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04144.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04143.jpg)
![](http://i212.photobucket.com/albums/cc122/koolrayz/DSC04130.jpg)
Last edited by koolrayz; 01-16-2009 at 01:09 PM.
#3
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
here is a link to a PDF file that details the fittings
http://www.professional-products.com...llus/10612.pdf
http://www.professional-products.com...llus/10612.pdf