3" True Dual Custom exhaust for 98-02 FBodies
02-23-2009, 09:59 AM
#1
3" True Dual Custom exhaust for 98-02 FBodies Selling a custom true dual 3" exhaust for a 98-02 F-body with long tubes. The slip flanges are setup to accept a 3.5" collector long header but can be changed to accept a standard 3" collector header at any local exhaust shop. There is a bung for a wideband O2 sensor in the crossover (H-pipe). It already has the crankcase evac tubes welded in with one way valves. Has 2 Borla XR1 mufflers. Has 3 bolt flanges on the end to accept baffles (included but not pictured) for sound deadening. Local or pick up only. First $300 takes it. FIRM.
Edit. Some massaging of the floor panel under the rear seats is required to get a good tuck.
Edit. Some massaging of the floor panel under the rear seats is required to get a good tuck.
02-23-2009, 10:57 AM
#4
Look close at the last picture and you can see how the floor pan is curved around the mufflers. You just have to beat the back corners up with a ball hammer to clear the back half of the muffler. It takes like 5 minutes as it is not reinforced in that area.
I see that Fernando built your tranny. I am LOSLS2 on Need2speed.
I see that Fernando built your tranny. I am LOSLS2 on Need2speed.
