FS: Ls1 Custom Cam From Flowtech
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jul 2006
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
This was a custom cam made for me from Ed at Flowtech. It was designed for a LS1 with the following mods, Fast 90 Manifold, NW 90mm TB, Kooks 1 7/8" long tubes, no cats, K&N CAI and Spintech Mufflers.
Asking 275.00 shipped plus if paypal 3% fees.
I asked that the cam be streetible and used for the road coarse racing.
Here are the perimeters of the cam
Intake Exhaust
Valve Adjustment: .000” .000”
Lobe Lift: .353” .341”
Gross Valve Lift 1.70 Ratio: .600” .580”
Duration @ .050” Tappet Lift: 228* 230*
Lobe Separation: 112*
Recommended Intake Centerline: 111*
Specs at 111 Degree Intake Centerline:
Valve Timing at Open Close
.050” Tappet Lift: Intake: 3* BTDC 45* ABDC
Exhaust: 48* BBDC 2* ATDC
Specs at 109 Degree Intake Centerline:
Valve Timing at Open Close
.050” Tappet Lift: Intake: 5* BTDC 43* ABDC
Exhaust: 50* BBDC 0* ATDC
![](http://i114.photobucket.com/albums/n268/Goofybid/DSC02159.jpg)
![](http://i114.photobucket.com/albums/n268/Goofybid/DSC02158.jpg)
Asking 275.00 shipped plus if paypal 3% fees.
I asked that the cam be streetible and used for the road coarse racing.
Here are the perimeters of the cam
Intake Exhaust
Valve Adjustment: .000” .000”
Lobe Lift: .353” .341”
Gross Valve Lift 1.70 Ratio: .600” .580”
Duration @ .050” Tappet Lift: 228* 230*
Lobe Separation: 112*
Recommended Intake Centerline: 111*
Specs at 111 Degree Intake Centerline:
Valve Timing at Open Close
.050” Tappet Lift: Intake: 3* BTDC 45* ABDC
Exhaust: 48* BBDC 2* ATDC
Specs at 109 Degree Intake Centerline:
Valve Timing at Open Close
.050” Tappet Lift: Intake: 5* BTDC 43* ABDC
Exhaust: 50* BBDC 0* ATDC
![](http://i114.photobucket.com/albums/n268/Goofybid/DSC02159.jpg)
![](http://i114.photobucket.com/albums/n268/Goofybid/DSC02158.jpg)
![](http://i114.photobucket.com/albums/n268/Goofybid/DSC02160.jpg)