rear mount turbo kit
#1
Banned
Thread Starter
iTrader: (14)
Join Date: Apr 2008
Location: odessa,texas
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i have a pieced together rear mount kit for an f-body here
this stuff was all bought new,installed on an lt1 and it turned out that the turbo was too small ,duh
has about 30 miles and 3 1/8mile passes on it and the guy pulled it off and sold it to me
im not going to use it anymore so i would like to sell it
the turbo is a t3/t4 to4e numbers on housing read a/r 58 m56 sa 1 and 2 1/4 a m56 cys 102,from what i have been told it is for a 4banger
it has a mocal oil return pump/braided feed and return hoses with a bag of extra fittings in case you need a 90 or something
i have two different flanges so i assume 1 is t3 and 1 is t4
there are several nice spectre rubber boot connecters for the piping and plenty of extra pipe in case you need to change something
piping is a jegs exhaust kit 2.5 inch
has a jegs boost controller also
from what i have figured out you will need a bigger turbo, wastegate ,and blow off valve then your set
looking for $400 plus shipping
this stuff was all bought new,installed on an lt1 and it turned out that the turbo was too small ,duh
has about 30 miles and 3 1/8mile passes on it and the guy pulled it off and sold it to me
im not going to use it anymore so i would like to sell it
the turbo is a t3/t4 to4e numbers on housing read a/r 58 m56 sa 1 and 2 1/4 a m56 cys 102,from what i have been told it is for a 4banger
it has a mocal oil return pump/braided feed and return hoses with a bag of extra fittings in case you need a 90 or something
i have two different flanges so i assume 1 is t3 and 1 is t4
there are several nice spectre rubber boot connecters for the piping and plenty of extra pipe in case you need to change something
piping is a jegs exhaust kit 2.5 inch
has a jegs boost controller also
from what i have figured out you will need a bigger turbo, wastegate ,and blow off valve then your set
looking for $400 plus shipping
#5
Banned
Thread Starter
iTrader: (14)
Join Date: Apr 2008
Location: odessa,texas
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yes if you ran two it should be plenty
i called and talked to hp about it and from what they said it flows about 600 cfm so i would say that 2 would do it for sure