Crane Rockers,Probe & JE Pistons
03-15-2009, 07:27 PM
#1
TECH Resident
Thread Starter
iTrader: (25)
Join Date: Jul 2005
Location: Houston
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
Crane Rockers,Bellhousing,Probe & JE Pistons Consider trading for Nitrous stuff,Slicks,Converters
Lakewood Bellhousing to put a T10,muncie,Saginaw Manual transmissions behind the lsx engines
350$
Crane Cams 1.8 Gold Roller Rockers
http://cranecams.com/?show=browsePar...ber=144759A-16
300$
Lsx Proble Stroker pistons NIB 19,3CC dish,locks and Rings Included
LS1 - 3.900 Stroke - 6.125 Rod - 1.175 C/H - .927 x 2.500 - 118 Gram Pin New 300$
Used JE custom 427 Pistons for 6.125rods and 4"Crank SBC or LSx
4.120 Diameter,1.115 CH,440 grams
3914F forgings
927" x 2.500" with .150" straight wall for spiro locks (included)
8.4CC - 0.080 Dish
Cost new 950$ will let go for 350$ shipped
Lakewood Bellhousing to put a T10,muncie,Saginaw Manual transmissions behind the lsx engines
350$
Crane Cams 1.8 Gold Roller Rockers
http://cranecams.com/?show=browsePar...ber=144759A-16
300$
Lsx Proble Stroker pistons NIB 19,3CC dish,locks and Rings Included
LS1 - 3.900 Stroke - 6.125 Rod - 1.175 C/H - .927 x 2.500 - 118 Gram Pin New 300$
Used JE custom 427 Pistons for 6.125rods and 4"Crank SBC or LSx
4.120 Diameter,1.115 CH,440 grams
3914F forgings
927" x 2.500" with .150" straight wall for spiro locks (included)
8.4CC - 0.080 Dish
Cost new 950$ will let go for 350$ shipped
Last edited by Ari G; 04-20-2009 at 11:51 PM.
