NX EFI Wet kit, MSD Windw Swtch, Bottle Heater, and Purge. + 3 1/2 Lingenfelter DS.
04-14-2009 | 09:08 PM
#1
Thread Starter
Joined: Jul 2005
Posts: 395
Likes: 0
From: NWburbs of Chicago
NX EFI Wet kit, MSD Windw Swtch, Bottle Heater, and Purge. + 3 1/2 Lingenfelter DS. ALL PRICES ARE OBO AND YOU PAY SHIPPING.
Also not looking to sell the N20 stuff separately at this time.
NX GM EFI Single Nozzle System(35-150HP) #20920-10:
This kit has been unused for the most part.A hand full of times before last fall. I sold the kit to my buddy and he went through it and used it at the end of the season. I believe he ran about 2 bottles through it. I bought it back from him at a better price than I sold it to him so Im selling it again. He said there were absolutely no problems with it. Im not going to be spraying anytime soon so I have no use for this. I have several more jets than what came with it. I will get more specific info when I get back to the shop. I can also get pics of whatever you desire. I will also send it with full instructions and complete. I have a dynotune automatic bottle warmer. Liquid filled NX gauge on the bottle. MSD RPM activated window switch. I have all the pills for the 6k range. I believe I only have 3k and 3200 for down low. I have a NX black rocker switch pannel that goes in the little cubby hole. Comes with blow down tube and fitting. 860 spare tire well bottle mount. I also believe there is a fuel safety switch in there. I will verify and also have pics within the next day or so.
$$650$$ OBO
NX Bottle & Liquid filled gauge W/ Dynotune Automatic Warmer
NX kit with accessories
NX kit with accessories
A better look at the goods
NX Iceman N20 Noid & Purge
NX Iceman N20 Noid & Purge
860 trunk mount, NX bottle, & Dynotune warmer.
3 1/2" Aluminum Lingenfelter Driveshaft:[/I]
Just as the heading states. I have one 3 1/2" aluminum DS. Ive ran it on the car for a while and was pleased with what it stood up to. It is in perfectly good condition and onli has about 10-15k miles on it. The only thing you would need is a new set of needle bearing caps. They fell off and were gone forever. It has a 1350 yoke. It will fit A4 and M6. 10 or 12 bolt. Ive also had it fit with BMR and UMI DS loops with no problems or scrapes.
http://www.lingenfelter.com/mm5/merc...egory_Code=C61
It retails for 499.99. I would like $350$ OBO
Any questions on anything, just ask. Im willing to deal a little bit, but Im not going to give it away. Ill be fair with you, just be fair with me as well. If you buy both together I think we can work a better price out.
Also Im willing to take some trades. Let me know what you have to peak my interest.
Thanks!
Jim
Also not looking to sell the N20 stuff separately at this time.
NX GM EFI Single Nozzle System(35-150HP) #20920-10:
This kit has been unused for the most part.A hand full of times before last fall. I sold the kit to my buddy and he went through it and used it at the end of the season. I believe he ran about 2 bottles through it. I bought it back from him at a better price than I sold it to him so Im selling it again. He said there were absolutely no problems with it. Im not going to be spraying anytime soon so I have no use for this. I have several more jets than what came with it. I will get more specific info when I get back to the shop. I can also get pics of whatever you desire. I will also send it with full instructions and complete. I have a dynotune automatic bottle warmer. Liquid filled NX gauge on the bottle. MSD RPM activated window switch. I have all the pills for the 6k range. I believe I only have 3k and 3200 for down low. I have a NX black rocker switch pannel that goes in the little cubby hole. Comes with blow down tube and fitting. 860 spare tire well bottle mount. I also believe there is a fuel safety switch in there. I will verify and also have pics within the next day or so.
$$650$$ OBO
NX Bottle & Liquid filled gauge W/ Dynotune Automatic Warmer
NX kit with accessories
NX kit with accessories
A better look at the goods
NX Iceman N20 Noid & Purge
NX Iceman N20 Noid & Purge
860 trunk mount, NX bottle, & Dynotune warmer.
3 1/2" Aluminum Lingenfelter Driveshaft:[/I]
Just as the heading states. I have one 3 1/2" aluminum DS. Ive ran it on the car for a while and was pleased with what it stood up to. It is in perfectly good condition and onli has about 10-15k miles on it. The only thing you would need is a new set of needle bearing caps. They fell off and were gone forever. It has a 1350 yoke. It will fit A4 and M6. 10 or 12 bolt. Ive also had it fit with BMR and UMI DS loops with no problems or scrapes.
http://www.lingenfelter.com/mm5/merc...egory_Code=C61
It retails for 499.99. I would like $350$ OBO
Any questions on anything, just ask. Im willing to deal a little bit, but Im not going to give it away. Ill be fair with you, just be fair with me as well. If you buy both together I think we can work a better price out.
Also Im willing to take some trades. Let me know what you have to peak my interest.
Thanks!
Jim
Last edited by Breaking Stuff; 04-27-2009 at 02:47 AM. Reason: Forgot to add the 860 bottle mount
04-25-2009 | 09:32 PM
#5
Thread Starter
Joined: Jul 2005
Posts: 395
Likes: 0
From: NWburbs of Chicago
