6.0 iron block fully machined ready to go
#1
Launching!
Thread Starter
iTrader: (6)
Join Date: May 2006
Location: Houston Texas
Posts: 211
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i own a cnc machine shop in pensacola florida and i decided to go a different route it is a 4.030 bore
after machining it is a 9.228 deck height.
it has been machined in the cnc machine for a jesel belt drive.
you can NOT use a stock style oil pump. has to be used with an external oil pump
it has durabond cam bearings in it
i can still machine the lifter bores to any size you want if needed.
they are still a stock .842 lifter
i am selling this block for 700.00
thanks,
David
after machining it is a 9.228 deck height.
it has been machined in the cnc machine for a jesel belt drive.
you can NOT use a stock style oil pump. has to be used with an external oil pump
it has durabond cam bearings in it
i can still machine the lifter bores to any size you want if needed.
they are still a stock .842 lifter
i am selling this block for 700.00
thanks,
David