FS: Weldon Fuel Pump 2025
05-08-2009, 07:31 PM
#1
9 Second Club
Thread Starter
iTrader: (7)
Join Date: Feb 2005
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
FS: Weldon Fuel Pump 2025 Weldon DB-2025-A
Used for about 75passes and 300 miles. This was apparently not my problem. This fuel pump was supplying my car enough fuel to go 9.0 at 155mph without a problem. Definitely a nice pump!
-12 in -10 out
Maximum HP: (-12 inlet and -10 outlet) 1400 hp Inj @ 14V EFI (700 hp on Methanol) & 1600 hp @ 14V Carb (800 hp on Methanol)
GPH/PSI Range: 140-180 GPH / 0-80 PSI
Features:
# Self Priming
Pump may be mounted above fuel cell
vertical or horizontal mount
# Breakaway coupling prevents pump/motor damage in the event of fuel contamination
# All internal wear components are 100% metallic
No plastics or composite materials. Our internal pumping elements are made of high speed tool steel and bronze. This results in the longest lasting, highest quality, most durable pumps available.
# Body machined from billet aluminum
# For carbureted or injected engines
# Provides Consistent Performance with no fall-off in flow
# Precise fuel delivery
# Blades self-compensating for wear
Current Fluids :
Weldon Pumps offer the widest range of fuel compatibility.
# Gasoline
# Diesel
# Methanol
# Ethanol
# Nitromethane
# All racing fuels
Comments: Requires appropriate bypass regulator, a -8 return line at a minimum is recommended.
Used for about 75passes and 300 miles. This was apparently not my problem. This fuel pump was supplying my car enough fuel to go 9.0 at 155mph without a problem. Definitely a nice pump!
-12 in -10 out
Maximum HP: (-12 inlet and -10 outlet) 1400 hp Inj @ 14V EFI (700 hp on Methanol) & 1600 hp @ 14V Carb (800 hp on Methanol)
GPH/PSI Range: 140-180 GPH / 0-80 PSI
Features:
# Self Priming
Pump may be mounted above fuel cell
vertical or horizontal mount
# Breakaway coupling prevents pump/motor damage in the event of fuel contamination
# All internal wear components are 100% metallic
No plastics or composite materials. Our internal pumping elements are made of high speed tool steel and bronze. This results in the longest lasting, highest quality, most durable pumps available.
# Body machined from billet aluminum
# For carbureted or injected engines
# Provides Consistent Performance with no fall-off in flow
# Precise fuel delivery
# Blades self-compensating for wear
Current Fluids :
Weldon Pumps offer the widest range of fuel compatibility.
# Gasoline
# Diesel
# Methanol
# Ethanol
# Nitromethane
# All racing fuels
Comments: Requires appropriate bypass regulator, a -8 return line at a minimum is recommended.
Last edited by TrakDay; 06-17-2009 at 12:34 PM.
